Specification

IMPORTANT: Turn off power before
installing or removing connector.
Product to be used in accordance with
local and national codes.
1. Strip wires 5/8” (15.9mm).
2. Align any frayed strands or
conductors.
3. Pre-twisting unnecessary. Place
stripped wires together with ends of
insulation even.
4. Twist connector onto wires pushing
firmly until hand-tight. Do not over
torque.
5. Wipe sealant in and around
conductors and connector opening
while tightening. Do not reuse.
Catalog # Selling Unit
62210 Card of 5
62225 Bag of 20
62235 Bag of 100
62241 Canister of 100
62250 Box of 500
Max. Voltage: 600V max. building wire
(1000V max. signs or luminaires)
Connector Size: 1 19/64” x 43/64”
Wire Type: Copper/Copper
Wire Range: Min #22/Max #8
Temperature Rating: 105°C (221°F)
Silicone Sealant Temperature: -45°F to 400°F
UL Designation: MWP
www.kinginnovation.com
(P) 800.633.0232
(F) 636.519.5410
PRODUCT SPECIFICATIONS
& MEASUREMENTS
Medium Waterproof Connectors
50100-02 REV K 10/18
1-3 #12 2 #14 w/2-4 #16 1 #12 w/1-3 #14
2-4 #14 1 #10 w/1-2 #14 1 #12 w/2-4 #18
2-6 #16 1 #10 w/1-3 #16 1 #14 w/3-4 #18
4 #14 w/1 #18 1 #12 w/1-4 #16 2 #12 w/1 #14
Measurements (Inches):
A - 1.30
B - 0.67
C - 0.51
Contact factory for a complete list of wire combinations at 800.633.0232.
INSTALLATION INSTRUCTIONS
Selected 600V Wire Combinations
For use with solid and/or stranded combinations.
Filled Connectors for Outdoor/Electrical Use
UL Listed as a Sealed Wire
Connector. For use in dry,
damp, wet locations below or
above grade when used in an
enclosure. For use in direct bury
applications when operating at
30 volts or less.
MADE IN USA
NEC Required for
Outdoor Connections