Specification

Max. Voltage: 600V max. building wire
(1000V max. signs or luminaires)
Connector Size: 1 1/4” x 13/16”
Wire Type: Copper/Copper
Wire Range: Min #14/Max #6
Temperature Rating: 105°C (221°F)
Silicone Sealant Temperature: -45°F to 400°F
UL Designation: LWP*
Catalog # Selling Unit
62310 Card of 3
62325 Bag of 15
62335 Bag of 50
62340 Bag of 250
www.kinginnovation.com
(P) 800.633.0232
(F) 636.519.5410
IMPORTANT: Turn off power before
installing or removing connector.
Product to be used in accordance with
local and national codes.
1. Strip wires 3/4” (19.1mm).
2. Align any frayed strands or
conductors.
3. Pre-twisting unnecessary. Place
stripped wires together with ends of
insulation even.
4. Twist connector onto wires pushing
firmly until hand-tight. Do not over
torque.
5. Wipe sealant in and around
conductors and connector opening
while tightening. Do not reuse.
PRODUCT SPECIFICATIONS
& MEASUREMENTS
Large Waterproof Connectors
50100-03 REV J 08/18
2 #8 1 #10 w/3-5 #14 3 #10 w/1-2 #18
2-3 #10 2 #10 w/1-2 #12 4 #12 w/1 #14
3-5 #12 2 #10 w/1-3 #14 1 #10 w/2-3 #12
3 #10 w/1 #14
Measurements (Inches):
A - 1.64
B - 0.82
C - 0.63
Contact factory for a complete list of wire combinations at 800.633.0232.
INSTALLATION INSTRUCTIONS
Selected 600V Wire Combinations
For use with solid and/or stranded combinations.
UL Listed as a Sealed Wire
Connector. For use in dry,
damp, wet locations below or
above grade when used in an
enclosure. For use in direct bury
applications when operating at
30 volts or less.
MADE IN USA
Filled Connectors for Outdoor/Electrical Use
NEC Required for
Outdoor Connections