Product Label

Protect Dryer Duct Neatly in the Wall
Give the Dryer Some Space
Eliminate Crushed Exhaust HoseEliminate Crushed Exhaust Hose
Safer, Roomier and More Efficient Laundry RoomsSafer, Roomier and More Efficient Laundry Rooms
Place the Dryer Flush to the Wall
Get More Space in the Laundry Room
Actual Crushed Hose without a Dryerbox
®
Unprotected Duct is a Fire Hazard
–WARNING–
Sharp Edges
Always Wear Proper
Protection
Model 425THD
(4.25" Deep - New Construction)
Designed for 2X6 (or 2X4 with Furring Strip) walls
51715 00110 98
Made in
the USA
Unprotected transition hose restricts airfl ow.
Recessing dryer connections keeps transition duct safe and e icient.
Protecting exhaust hose helps reduce lint build up and helps shorten
drying time by eliminating bends and kinks behind the dryer.
The Dryerbox: save space, save energy and reduce fire dangers.
The Dryerbox is intended to be installed directly to the wall framing. If drywall exists, it is recommended to cut an
inspection hole to determine if any obstacles exist. Remove drywall to expose framing.
El Dryerbox está concebido para ser instalado directamente en el marco de la pared. Si existe una lámina de yeso, se
recomienda hacer un corte de inspección para determinar si hay algún obstáculo. Remueva la lámina de yeso para
exponer el marco.
Transition Hose
Sold Separately
Shown Painted
Connect dryer transition duct
to solid metal duct. Secure
with adjustable clamp (not
included).
Step 7
Install and finish drywall
around the Dryerbox.
Optional, the Dryerbox can
be painted with latex or oil-
based paint.
Step 5 Step 6
Insert solid metal duct
through porthole of the
Dryerbox. Break away Duct
Support Tab once duct is
secured and supported.
Step 3 Step 4
Position the Dryerbox to align
with the exhaust port on the
back of the clothes dryer. For
most models, this is directly in
the center of the appliance.
Attach the Dryerbox to a
wall stud and bottom plate.
A minimum of 3 corners is
required.
Step 1 Step 2
Visit www.Dryerbox.com for Detailed Instructions Before Installation
Visite www.Dryerbox.com para obtener instrucciones detalladas antes de la instalación.
®
Visit dryerbox.com/firestop
for UL Classified installation
of the Dryerbox.
Manufactured by InOvate Technologies, Inc.
250 S. Central Blvd, Suite 207
Jupiter, FL 33458 • 561-743-8696
Advertencia de
Bordes Afilados
- Siempre use
la protección
adecuada.
Coloque el Dryerbox de forma
alineada con el orificio de escape
en la parte posterior de la secado-
ra de ropa. En la mayoría de los
modelos, éste está directamente
en el centro del artefacto.
Fije el Dryerbox a un travesaño
de la pared y a la placa inferior.
Se requiere un mínimo de 3
esquinas.
Inserte un conducto de metal
sólido a través del orificio del
Dryerbox. Rómpala una vez
que el conducto esté apoyado.
Instale y termine la lámina de yeso
alrededor del Dryerbox.
Opcionalmente, el
Dryerbox puede ser pintado
con pintura de látex o a base
de aceite.
Conecte el conducto de transición
de la secadora al conducto de
metal sólido. Asegúrelo con una
abrazadera ajustable (no incluida).
Bend Duct Support Tab to keep
metal duct at the ideal length.
Doble la Lengüeta de Soporte del
Conducto para mantener el con-
ducto de metal a la longitud ideal.