Use and Care Manual

PRODUCT DATA SHEET
Publication Date: 6–22–23
DRYLOK
®
Fast Plug
®
Hydraulic
Cement
PRODUCT DESCRIPTION
DRYLOK
®
Fast Plug
®
is a quick setting hydraulic cement. It sets in
3-5 minutes to stop active leaks, even under pressure. Seals open
joints, very large cracks, holes, and penetrations in masonry,
concrete, CMU block, and precast.
Fast setting hydraulic cement
High strength, non-shrink
Sets in 3-5 minutes
Stops water, even under pressure
Patch mortar joints, cracks, holes, and penetration in masonry
walls
No top-coat required
Reduces radon gas penetration
Anchors posts, poles, railings, and bolts into concrete.
BASIC USES
Anchors metal to concrete. Ideal for sealing floor and wall joints
and settlement cracks in masonry walls and swimming pools. This
fast-setting hydraulic cement patches holes even where water is
actively flowing through them. Seals openings and penetrations in
masonry and pre-cast concrete for underground piping, sewers,
and manholes.
TECHNICAL DATA
COMPOSITION: Sand and cement
% WEIGHT SOLIDS: 100%
DENSITY (LBS./US GAL.): 24.0 ± 0.3% (S.G. 2.87 ± 0.02)
COLOR:
• Gray
SET TIME: 3–5 minutes
COVERAGE
16 cu. in./lb.
SET TIME
3–5 minutes
CLEAN-UP
Soap and water
Dispose of contaminated
absorbent, container,
and unused contents in
accordance with local,
state, and federal
regulations.

Summary of content (4 pages)