Use and Care Manual

DRYLOK® Latex Concrete Floor Paint
DRYLOK Concrete Floor Paint is specially
formulated to protect and decorate
masonry oors in homes and industry, both
indoors and outdoors. DRYLOK Concrete
Floor Paint is a scientically formulated
“treatment” for masonry oors. It
outperforms ordinary oor paint under
traffic, washings, weather, acids and alkalis.
Use on new or previously
painted surfaces
Non-flammable
Resists hot tire pick-up
No primer needed
Complies with all current VOC requirements
White is tintable
Formulated to protect and beautify interior
and exterior concrete oors, garage oors,
basement oors, shop oors, walkways, and
patios.
COMPOSITION:
Latex
SHEEN:
Flat
% WEIGHT SOLIDS:
212 White: 49 ± 0.5%
213 Gull: 48.5 ± 0.5%
214 Dover Gray: 49 ± 0.5%
226 So Gray: 45.0 ± 0.5%
215 Persian Red: 46.6 ± 0.5%
216 Bamboo Beige: 48.6 ± 0.5%
227 Sandstone: 49.6 ± 0.5%
229 Terra Coa: 47.4 ± 0.5%
233 Georgetown Gray: 44,2 ± 0.5%
217 Dark Tint Base: 41.6 ± 0.5%
50g/L VOC
234 White*: 47.2 ± 0.5%
296 Gull*: 46.2 ± 0.5%
295 Dover Gray* : 46.6 ± 0.5%
294 So Gray* : 42.9 ± 0.5%
297 Sandstone*: 47.9 ± 0.5%
298 Dark Tint Base*: 44.9 ± 0.5%
% VOLUME SOLIDS:
212 White: 35.5 ± 0.5%
213 Gull: 35.5 ± 0.5%
214 Dover Gray: 36.0 ± 0.5%
226 So Gray: 34.5 ± 0.5%
215 Persian Red: 35 ± 0.5%
216 Bamboo Beige: 35.9 ± 0.5%
227 Sandstone: 36.1 ± 0.5%
229 Terra Coa: 35.1 ± 0.5%
233 Georgetown Gray: 33.7 ± 0.5%
217 Dark Tint Base: 33.5 ± 0.5%
50g/L VOC:
234 White*: 33.7 ± 0.5%
296 Gull*: 33.3 ± 0.5%
295 Dover Gray*: 33.4 ± 0.5%
294 So Gray*: 32.1 ± 0.5%
297 Sandstone*: 34.0 ± 0.5%
298 Dark Tint Base* : 33.8 ± 0.5%
DENSITY (LBS./US GAL.):
212 White: 10.4 ± 0.2
213 Gull: 10.4
214 Dover Gray: 10.40
226 So Gray: 9.89
215 Persian Red: 10.10
216 Bamboo Beige: 10.37
227 Sandstone: 10.54
229 Terra Coa: 10.25
233 Georgetown Gray: 9.90
217 Dark Tint Base: 9.45
50g/L VOC:
234 White*: 10.44
296 Gull*: 10.31
295 Dover Gray*: 10.37
294 So Gray*: 9.9
297 Sandstone*: 10.54
298 Dark Tint Base*: 10.00
VISCOSITY:
71-77 Ku
pH:
8.5-9.5
COLORS:
• White – ready mixed formula
• 8 ready mixed colors
• Available in Dark Tint Base for custom
coloring
DRY TIME:
• To touch: 30 minutes-1 hour
• To recoat: 4 hours
• Light use: 4 hours
• Heavy use: 24 hours
• Vehicular traffic: 5 days
Note: Maximum cure and dry time will
be prolonged when slightly humid
and/or damp, cool conditions prevail.
CLEAN UP:
Soap and water
Dispose of contaminated absorbent,
container and unused contents in
accordance with local, state and federal
regulations.
COVERAGE (SQ. FT./US GAL.):
• 500-600 sq. ./gal.
Note: Actual coverage will vary
depending upon application method,
surface texture and porosity.
RECOMMENDED FILM THICKNESS/COAT:
• 4 wet mils/coat
FLASH POINT:
N/A
SHELF LIFE:
5 Years
FREEZE/THAW:
®®
UNITED GILSONITE LABORATORIES
MAILING: P.O. Box 70, Scranton, Pennsylvania, 18501
SHIPPING: 1396 Jefferson Avenue, Dunmore, Pennsylvania, 18509
T
OLL FREE: 1-800-UGL-LABS (845-5227)
P
HONE: 1-570-344-1202 • FAX: [phone]
www.ugl.com
D R Y L O K ® M A S O N R Y P R O D U C T S
O V E R
DRY TIME:
2 Hours
Recoat 4 Hours
CLEAN-UP:
Soap and Water
COVERAGE:
2 Coats Maximum
SPREAD RATE:
500-600 Sq.
Ft./Gallon