Operation Manual

16
Dear Customer,
In these operating instructions we will show you how you can use your new "Tape 2 MP3"
Cassette Converting Device and the "Audacity®" software (free software from the Internet)
to digitise your cassette recordings.
Please note that the form and colour of the application and system windows which are shown
in these instructions may vary depending on which Mac version you are using and your own
personal settings.
As the device can also play back the cassettes, you will also nd a section in these instructions
on how to use the device as a playback device.
We now hope you have a lot of fun with your new device.
Please note:
Tips and recommendations are marked in these instructions with this symbol.
Installation of the Software
The software which is supplied is not compatible with the Mac operating system. To use the
device with a Mac, please use the "Audacity®" software. You can download this
free of charge from http://audacity.sourceforge.net/download/mac. To do this, proceed
as follows:
GB
Contents
Installation of the Software _______________________________________ 16
Overview of the Software _______________________________________ 18
Downloading "Lame MP3 encoder" _________________________________ 20
Use ________________________________________________________ 20
As Playback Device For Cassettes _________________________________________ 20
As Converting Device _________________________________________________ 21
Troubleshooting ______________________________________________ 27
Use As Playback Device For Cassettes _____________________________________ 27
Use As Converting Device ______________________________________________ 27
Customer Service _____________________________________________ 28