Operation Manual

Inserting the Batteries

The battery compartment is located behind the cassette compartment cover. You

require two 1.5 V batteries, AA type. These are not supplied.

1. Open the cassette compartment.

2. Use your nger nail to push the battery compartment cover in the direction of the arrow

and lift the cover up and off at the same time.

3. Insert two 1.5 V batteries, type AA into the battery compartment. Pay attention to the

correct polarity (+/–).

4. Close the battery compartment. The cover must be heard to engage in place.

Now insert a cassette into the cassette compartment, close the cassette compartment

cover, plug headphones into the device and start music playback

by pressing the PLAY button.

Using the USB Cable

1. Plug the USB connector of the USB cable which is supplied into a USB port on your com-

puter, which must be switched on.

2. Plug the mini-USB connector into the USB port of the device.

Now insert a cassette into the cassette compartment, close the cassette compartment

cover, plug headphones into the device and start music playback

by pressing the PLAY button.

As Converting Device

• Before you can digitise cassette recordings with the device, you must install the

software on your computer (see "Installation of the Software" chapter).

• Close all other programs which are running during the recording to ensure a

transfer with as little interference as possible.

1. Connect the device to your computer, which must be switched on. To do this, plug the

USB connector of the USB cable which is supplied into a USB port on your computer and

the mini-USB connector into the USB port of the device.

2. Open the application by double-clicking on the application icon

(can be found on your

"Desktop") or by double-clicking on the "Audacity" application le (can be found in the cor-

responding folder in the "Applications" directory).

The following application window will appear: