Operation Manual

16
Dear Customer,
In these operating instructions we will show you how you can use your new “Tape 2 MP3”
Cassette Converting Device and the “JYKRecorder” software which is also supplied (only suit-
able for Windows XP, Vista and 7!) to digitise your cassette recordings.
Please note that the form and colour of the programs and system windows which are shown
in these instructions may vary depending on which version of Windows you are using and your
own personal settings.
As the device can also play back the cassettes, you will also nd a section in these instructions
on how to use the device as a playback device.
We now hope you have a lot of fun with your new device.
Please note:
Tips and recommendations are marked in these instructions with this symbol.
Installation of the Software
1. Insert the installation CD into the CD-ROM drive of your computer. The content of the
CD will automatically open in a new window.
• If a window does not open automatically, go to “My Computer” (on Windows
XP) or “Computer” (on Windows Vista and Windows 7) and open the direc-
tory for the CD-ROM drive by double-clicking on it. (The CD-ROM drive is
generally identied by the letter “D”.)
• If a warning appears, click on “Yes” or “Run”.
GB
Contents
Installation of the Software _______________________________________ 16
Overview of the Software _______________________________________ 19
Downloading “Lame MP3 encoder” ________________________________ 20
Use ________________________________________________________ 21
As Playback Device For Cassettes _________________________________________ 21
As Converting Device _________________________________________________ 21
Troubleshooting ______________________________________________ 27
Use As Playback Device For Cassettes _____________________________________ 27
Use As Converting Device ______________________________________________ 28
Customer service _____________________________________________ 28