Operation Manual

20
K “Boost”
If the tick appears in the box, the signal is boosted by 20 dB during the recording.
L “Record Format”
This is where the record format can be stipulated. The preset value is recommended.
M “Playback Device”
Here you can select the playback device from which the track is to be recorded. The
“Tape 2 MP3” Cassette Converting Device is preset.
N “Language” button
This is where the language of the program can be subsequently changed.
O “Exit” button
Closes the program.
Downloading “Lame MP3 encoder”
To save a recorded track as an MP3 le, you require the “Lame MP3 encoder”. Before you
rst save a track as an MP3 le, you must rst download this once from
www.rarewares.org/les/mp3. To do this, proceed as follows:
1. Enter the specied web address into your browser.
The following website will open:
Click on the link “Lame3.98.4.zip” and save the ZIP le on your “Desktop”.
2. Go to your “Desktop”, extract the ZIP le (e. g. by double-clicking on it or clicking on the
le icon with the right-hand mouse button) and save the extracted les on your “Desktop”.
Now continue in the manner described in the “Use” chapter, “As Converting Device” section.