Operation Manual
27
e. Once you have clicked on the “Open” button, the track is now saved on your computer
and the following window will appear:
Click on “OK”. You can now either record further tracks or close the program by
clicking on the “Exit” button.
Troubleshooting
If the device or the digitalization should stop working properly, rst check whether you are
able to correct the problem yourself. If you are not, contact the Customer Service department
(see the “Customer Service” chapter).
Use As Playback Device For Cassettes
Problem Possible cause/solution
A cassette is inserted in the
device, but the device does not
play the cassette when I press
the PLAY button.
When using batteries:
• Are batteries inserted (correctly) in the device? You
require two 1.5 V batteries, AA type. Pay attention to
the correct polarity (+/–).
When using the USB cable:
• Is the device connected correctly to the computer?
• The USB port may be broken or not delivering
sufcient power to run the device. Insert batteries
into the device.
• The cassette is at the end. Open the cassette
compartment and turn the cassette over.
• Is the cassette tape torn?