Operation Manual

28
Use As Converting Device
Problem Possible cause/solution
A window does not open
after inserting the installation
CD.
If a window does not open automatically, go to “My Compu-
ter” (on Windows XP) or “Computer” (on Windows Vista
and Windows 7) and open the directory for the CD-ROM
drive by double-clicking on it. (The CD-ROM drive is gener-
ally identied by the letter “D”.)
Then proceed in the manner described in the “Installation of
the Software” chapter.
A warning message opens up
after inserting the installation
CD.
Click on “Yes” or “Run”.
Then proceed in the manner described in the “Installation of
the Software” chapter.
Why do I need the “Lame
MP3 encoder” and where do
I get it from?
You need the “Lame MP3 encoder” to save a recorded track
as an MP3 le.
Before you rst save a track as an MP3 le, you must rst
download this once from www.rarewares.org/les/mp3
and extract it (see “Downloading ‘Lame MP3 encoder’”
chapter).
No tone curve is shown on
the Recorded Waveform
Display during the recording.
• Is the volume on the device switched on?
• Is the device connected correctly to the computer?
The sound quality of the
recorded track is not good.
• The quality of the recording depends on the quality of
the cassette recording. Is the quality of the original track
acceptable?
• Reduce the volume for the recording or change the
record format or the conversion rate (if you want to
save the track as an MP3 le).
Customer service
If you have any questions about this device or the software, please contact our customer
service department:
DS Produkte GmbH, 19258 GALLIN, GERMANY
Tel. [phone] *)
E-mail: [e-mail]
*) Calls subject to a charge.
We reserve the right to modify the product, packaging or enclosed documentation at any time in conjunction with
our policy of continuous development.
Importer:
DS Produkte GmbH, Am Heisterbusch 1, 19258 GALLIN, GERMANY
All rights reserved.