OWNER’S MANUAL MRX100
INSTALLATION ........................................................................................................ 3-4 WIRING CONNECTION.............................................................................................. 5 OPERATION ............................................................................................................... 6 LOCATION OF THE KEYS ........................................................................................ 6 KEY FUNCTION ...........................
INSTALLATION Notes: Choose the mounting location where the unit will not interfere with the normal driving function of the driver. Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.
INSTALLATION 4
CONNECTION 5
OPERATION. LOCATION OF KEYS 1. CAM button 2. Power/SRC button Play/pause button 3. 4. TFT Screen 5. Seek up button 6. Seek down button 7. VOL button 8. menu button 9.
KEY FUNCTIONS Key functions KEYS ACTION RADIO USB AUX BT MUSIC STANDBY PWR/ Short Source change Source change Source change Source change Power on SRC Long Power off Power off Power off Power off / Short Camera source Camera source Camera source / Long Night/Day Night/Day Night/Day Night/Day / Setting menu Setting menu Setting men Setting menu / back / back / back / back Exit menu Exit menu Exit menu Exit menu / USB setting / / / / / CAM Short Long Short
OPERATION Basic Operation Turn on/off the unit Press /SRC button to turn on the unit. When the unit is on. Press and hold it for 2 seconds to turn off the unit. Mute on/off When the unit is on. Press ►II button to mute the sound. Press it again to resume the sound. Setting menu Press button into the setting menu.
OPERATION Reset function In the setting menu, select RESET item and press YES to restore all the data back to the factory setting. Noted: When you reset the unit, All the memories will be lost! Radio Operation Press SRC button then rotate VOL knob to select FM/AM source. Shortly press / button to receive the desired radio station. Press and hold / button for manual tuning the frequency. Auto Store: Press ►II button for 2 seconds to auto store stations to the presets.
OPERATION In PTY item. Rotate VOL knob to select the PTY kinds. When shown the VOL kind you want. Press VOL knob to search. WB (Weather Band) Operation Press SRC button then rotate VOL knob to select WB source. Select station: Press PRESETS button into the presets, rotate VOL knob to select the desired preset, then press VOL knob. Also press / button you can select next/previous station. USB Operation When an USB driver is inserted to the unit, the unit will play the MP3/WMA file automatically.
Other operation please reference the Key functions table above. Bluetooth. In BT source, press and hold PRESETS button for 2 seconds to disconnect/re-connect the Bluetooth. GENERAL Power Supply Requirements Chassis Dimensions Tone Controls - Bass (at 100 Hz) - Treble (at 10 kHz) Maximum Output Power Current Drain RADIO Frequency Coverage IF Sensitivity Stereo Separation : DC 12 Volts, Negative Ground : 140(W) x 130 (D) x 85(H) : ±10 dB : ±10 dB : 4 x 40 watts : 15 Ampere (max.) FM 87.5 to 107.9 MHz 10.
FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
