Owner's Manual

OPERATION

Basic Operation

Turn on/off the unit

Press /SRC button to turn on the unit. When the unit is on. Press and hold it

for 2 seconds to turn off the unit.

Mute on/off

When the unit is on. Press ►II button to mute the sound. Press it again to

resume the sound.

Setting menu

Press button into the setting menu. Rotate VOL knob to setting below items:

ZONE1->ZONE2->SUBWOOFER->BEEP->CLOCK SETTINGS ->

LANGUAGE->AREA->LOCAL->STEREO/MONO->DIMMER->BRIGHTNESS-

>CONTRAST->HUE->GAIN LEVEL->MAX VOL->P-VOL->ZONE RENAME->

RESET->VERSION

In each item Rotate VOL+/- knob to set them.

Note: In the menu, press return to previous menu, hold button to exit

menu.

ZONE1/ZONE2 bass/treble/balance/preset EQ setting

Enter the ZONE1 / ZONE2 sub-menu, rotate VOL knob to select BASS /

TREBLE/BALANCE/FADER/Preset EQ, then rotate VOL knob to select them

or changing their value then press VOL knob to exit this item.

Main volume/ZONE2 VOL/SUB VOL operation

1) Rotate VOL knob to adjust the main volume up/down. The zone1/zone2/sub

volume can be controlled.

2) Press VOL knob once shows ZONE2 VOL, then rotate VOL knob to adjust

ZONE2 volume only.

3) Press VOL knob twice shows SUB VOL, then rotate VOL knob to adjust

subwoofer volume only.

DAY/NIGHT mode operation

Press and hold CAM button to change DAY/NIGHT mode.

Switch to CAMERA source

There are 3 ways to switch to CAMERA source as below:

1) press SRC button the rotate VOL knob to select CAMERA source. In this

way, the speaker will no sound.

2) The “Camera trigger” wire connected to 12V power. It will switch to

CAMERA source. In this way speaker keeps previous source sound.

3) Press CAM button to switch CAMERA source. Press it again back to

previous source. In this way speaker keeps previous source sound.