Owner's Manual

9
OPERATION
Reset function
In the setting menu, select RESET item and press YES to restore all the data
back to the factory setting.
Noted: When you reset the unit, All the memories will be lost!
Radio Operation
Press SRC button then rotate VOL knob to select FM/AM source. Shortly press
/ button to receive the desired radio station. Press and hold /
button for manual tuning the frequency.
Auto Store:
Press ►II button for 2 seconds to auto store stations to the presets.
Manually store station:
Receiving a desired station. Press PRESETS button into the presets, rotate
VOL knob to select a preset, then press and hold PRESETS button to save to
this preset.
Recall preset station:
Press PRESETS button into the presets, rotate VOL knob to select the desired
preset, then press VOL knob.
RDS Operation
Press and hold PRESETS button to show the RDS menu. Rotate VOL knob to
set them.
Note: In USA area, The AF no function (can not be set to on). AF is enable in
EUROPE area.
In AF item (press menu button) .You can setting the AF to on/off.
AF on: Symbol “AF” appears on the display. Program name is displayed on
receiving a RDS station. “AF” symbol starts blinking if the broadcasting signal
getting worse. It will start to search the stronger station which in AF list and
switch to the good station. If it doesn’t find a stronger station in AF list. It will
active the PI SEEK mode to search station which as same PI.
AF off: switch off the AF mode.
Traffic Announcement (TA)
TA on: When received a TA station it will switch temporarily to radio mode to
listen to the TA station whatever in RADIO/USB/AUX/BT mode. If the volume
level was under the TA volume it will be raised to the TA volume automatically.
TA off: Turn off the TA function.
PTY operation