Instruction manual

31
PC1555 Version 2.X, PC5010 Version 2.0, PC5015 Version 2.2 and PC580
Version 2.1
Make note of the Downloading Access Code programmed in Section [403] and the
Panel Identifier Code programmed in Section [404]. You must enter these values into
the DLS account. Make sure that the Panel Identifier Code is not the same as the
Identifier Codes in other Accounts.
To Have the Computer Call the Control Panel
1.1.
1.1.
1. The panel will answer on a double call, enable Downloading Answer in
Section [401] Light [1].
2.2.
2.2.
2. The PC1555, PC5010, PC5015 and PC580 have a 6-hour DLS answer
window for added security: after the panel is powered-up, it will answer the
phone on a double call for a 6-hour period.
Downloading can also be enabled by the user through User Functions when
the “User Can Enable DLS Window” option is enabled (
Section [401],
Option [2]
). When the user enters [
✱✱
✱✱
✱][6][Master Code][5] at any keypad,
the panel will be able to answer the phone for a 6-hour period. This time can
be set to 1 hour instead of 6 hours in
Section [702], Option [7] .
3.3.
3.3.
3. You can enable the Callback feature by turning on Option [3] in Section
[401] , if you require this security feature. If you enable this feature, you must
also program the telephone number of the downloading computer in
Section [402] .
To User Initiate a Call to the Computer
1.1.
1.1.
1. If the control panel is to be able to call the downloading computer, turn on
Option [4] in Section [401] .
2.2.
2.2.
2. When you enable this feature, the downloading computers telephone
number must be programmed in
Section [402] .
3.3.
3.3.
3. To have the control panel call the downloading computer, press [
✱✱
✱✱
✱][6][Master
Code][6] to select the User Initiated Call.