Instruction manual

35
To Have the Control Panel Call the Computer
1. If the system is to periodically call the downloading computer, turn ON Light
[7] in Section [49] to enable periodic downloading.
2. When using this feature, a downloading telephone number must be
programmed in
Section [46] .
3. A time for the periodic download must be programmed in Test Transmission
Time of Day which is in
Section [23] . The interval, in days, for the periodic
downloading may also be programmed in Test Transmission/Periodic
Download Cycle Time which is in
Section [22] .
PC4000 - All Versions
Make note of the Downloading Access Code and Panel ID Code which can be
programmed in the DLS Section. Enter Installer’s Mode by pressing, [
✱✱
✱✱
✱][8][Installer’s
Code]. To program the Downloading Access Code , enter [0] for System Area, then
[0][4] for DLS Section and then [4] for the Downloading Access Code. To program the
Panel ID Code , enter [0] for System Area, then [0][4] for DLS Section and then [3] for
the Panel ID Code.
You must enter these values into the DLS account. Make sure that the Panel ID Code
is not the same as the ID Codes in other work files.
Refer to the control panel Installation Manuals for further information.
To Have the Computer Call the Control Panel
1.
To enable the panel for downloading, first enter Installer’s programming.
Then press
[0] for System Area , then [0][4] for DLS Section and then DLS
Toggles [0] . Ensure that the Ring Detect function is enabled. If there is an
answering machine connected to the same line as the panel, also ensure
that the Double Call function is enabled. Exit the section. Select
[6] for # of
Rings
to set the number rings for the panel to answer. Exit Installer’s
Programming Mode.
2. If you require the Callback feature as an additional level of security, select
[0] for DLS Toggles while still in the DLS Section and enable DLS Callback.
If you enable this feature, you must also program the telephone number of
the downloading computer. Select
[2] for Phone Number while still in the
DLS Section and program the downloading computer’s telephone number.
To User Initiate a Call to the Computer
1. To enable the User Call Up function that allows the control panel to be able
to call the downloading computer, enter Installer’s Mode by pressing,
[
✱✱
✱✱
✱][8][Installer’s Code]. Then press [0] for System Area , then [0][4] for
DLS Section and then DLS Toggles [0] . Set the User Call Up feature and
exit the section.
2. When using this feature, a downloading telephone number must be
programmed. To program the downloading telephone number, select [2] for
Phone Number from the DLS Section .
3. Exit Installer’s Programming, and then enter [
✱✱
✱✱
✱][6][Master Code][7] to
initiate a call to the downloading computer.