Specifications

K E Y P A D C O M M A N D S
17
How to erase Access Code:
Select the code to be erased and press [✱].
[✱]+[6] User Functions
This keypad command can be used to program several different functions. The following are the items
programmable:
[1] - Time and Date [4] - System Test [6] - User Initiated Call-Up
[2] - Auto-Arm Enable * [5] - Enable DLS (Downloading) [7] - For future use
[3] - Auto-Arm Time *
Auto-Arm items (noted with the “*” symbol) are programmable by Partition. These must be programmed
at a keypad assigned to the correct Partition
(See Section 2.6 “Keypad Assignment”).
To program User Functions:
1.Press [✱] [6] [Master Code]. The keypad will flash the ‘Program’ light.
2.Press the number [1] to [6] for the item to be programmed.
• [1] - Time and Date
The time and date must be accurate for the Auto-Arm or Test Transmission functions to work properly. In
addition the event buffer time and date stamps all events.
- Enter the time: hour and minute, using military format [HH MM]. (00:00 to 23:59)
- Enter the date: month, day and year [MM DD YY].
All entries must be 2 digits. January, for example, would be month [01].
• [2] - Auto-Arm Enable/Disable (Shall not be enabled on UL Listed systems)
Auto-Arming will not work until it is enabled for the Partition.
Press [2]. If the keypad beeps 3 times rapidly Auto-Arm is enabled, one long beep means it is disabled.
• [3] - Auto-Arm Time
Each Partition can be programmed to Auto-Arm at a different time.
Enter the time, hour and minute, using military format [HH MM].
All entries must be 2 digits. Eight o’clock in the morning would be [08] hours and [00] minutes.
• [4] - System Test
When [4] is pressed the panel will perform the following:
- sound the alarm output for two seconds
- light all lights on the keypad
- sound the keypad buzzer for two seconds
- test the main panel/PC5204 battery
- send a System Test Reporting code, if programmed
(See Section 5.7 “Communicator - Reporting Codes”) .
• [5] - Enable DLS (Downloading)
When [5] is pressed the panel will turn on the downloading option for one hour. During this time the
panel will answer incoming downloading calls (See Section 5.8 “Downloading”) .
• [6] – User Initiated Call-Up
When [6] is pressed, the panel will initiate a call to the downloading computer.
• [7] - For future use
Additional Features Available from the LCD Keypad
Additional Features are available on the LCD keypad. These features do not have numbers assigned.
Use the arrow keys (< >) to scroll through the [✱] [6] menu and press the [✱] key to select the following
commands.
View Event Buffer
The 128 Event Buffer can be viewed through any LCD keypad
(See Section 5.16.1 “Viewing the Event
Buffer Through the LCD Keypad”)
.
Brightness Control
When this option is selected the keypad will allow you to scroll through 10 different backlight level
options. Use the arrow keys (<>) to scroll to the desired backlight level and press the [#] key to exit.
Contrast Control
When this option is selected the keypad will allow you to scroll through 10 different contrast level options.
Use the arrow keys (<>) to scroll to the desired contrast level and press the [#] key to exit.
Keypad Sounder Control
When this option is selected the keypad will allow you to scroll through 21 different keypad sounder tone
options. Use the arrow keys (<>) to scroll to the desired keypad sound level and press the [#] key to exit.
This function can be achieved on LED keypads by holding the [✱] key.