MB 110 WN (SCBT8) WHITE NOISE Secure Headset Instruction manual
Contents Contents Important safety information ...................................................................... 2 The MB 110 WN Bluetooth headset ............................................................ 4 Package contents ........................................................................................... 5 System requirements .................................................................................... 5 Product overview .............................................................
Important safety information Important safety information 왘 Read this instruction manual carefully and completely before using the product. 왘 Always include this instruction manual when passing the product on to third parties. 왘 Do not use an obviously defective product. Preventing damage to health and accidents 왘 Do not listen at high volume levels for long periods of time to prevent hearing damage. 왘 Always maintain a distance of at least 3.
Important safety information Safety instructions for rechargeable batteries In extreme cases, abuse or misuse of rechargeable batteries can lead to: WARNING • • • • explosion, fire development, heat generation or smoke or gas development. Dispose of products with built-in rechargeable batteries at special collection points or return them to your specialist dealer. Switch rechargeable battery-powered products off after use.
The MB 110 WN Bluetooth headset The MB 110 WN Bluetooth headset The MB 110 WN Bluetooth headset is the wireless solution for highly secure communication. It only works together with the WHITE NOISE mobile application and features a hardware based encryption technology. The solution can support the highest security levels while allowing business users to continue using the mobile devices they already own. Bluetooth The headset complies with the Bluetooth 5.0 standard and is compatible with all Bluetooth 1.
Package contents Package contents MB 110 WN mono Bluetooth headset with built-in rechargeable Lithium-Polymer battery Adjustable ear hook Ear adapters with loop (S, M, L) Car charger (Sold Separately) Charging cable Quick Guide Safety Guide Quick Guide Safety Guide The WHITE NOISE application and its user guide will be delivered by the reseller. System requirements The MB 110 WN secure headset only works with the WHITE NOISE mobile application. 왘 Install the WHITE NOISE Application.
Product overview Product overview MB 110 WN headset 4 2 1 5 3 9 6 8 7 1 Volume + button* 6 Speaker 2 Volume – button* 7 Ear hook 3 Multi-function button 8 USB socket 4 Microphones 9 LED 5 On/Off power slide * You can swap the +/– assignment of the Volume buttons (see page 17) If, for example, you want to wear the headset on the left ear instead of the right (see page 13).
Product overview Overview of pictograms Meaning of the pictograms for pressing a button Pictogram Meaning Briefly press this button. 2x Double-press this button. 5s Keep this button pressed for 5 seconds. Meaning of the pictograms for the flashing of the LED Pictogram Meaning This pictogram symbolizes a flashing. 1s This pictogram symbolizes a time interval. Examples of some of the pictograms that are used throughout this instruction manual: Pictogram Meaning The LED flashes.
Product overview Overview of the LED indications Meaning during operation LED Meaning Headset switches on Headset switches off Headset is in pairing mode Pairing was successful Pairing has failed or has been cancelled 2s 2s Connectable state, not connected Once the headset is successfully connected, the LED goes off. Meaning during calls LED Meaning Incoming call Incoming call + rechargeable battery is weak Meaning during charging LED corresponds to a battery life of ...
Product overview Overview of buttons Multi-function button Press the button 1s Function Page Beep(s) Accepts a call (incoming call) Ends a call (active call) Retrieves information on the remaining battery life Rejects a call (incoming call) During an active call: Mutes/unmutes the headset‘s microphone 18 18 16 – 18 18 – Changes to pairing mode (idle) 11 4s Volume buttons Button Press one of the volume buttons Duration Function Page Beep(s) During an active call: 17 – Increases/reduces the spea
Putting the headset into operation Putting the headset into operation Charging the headset battery WARNING Danger of injury! Wearing the headset when charging can cause burns and injuries. 왘 Do not wear the headset when charging. 1:20 h A complete charging cycle takes about 1 hour and 20 minutes. Before using the headset for the first time, charge the rechargeable battery for a complete charging cycle without interruption. A charging time of ... corresponds to a battery life of ... LED flashes approx.
Putting the headset into operation Pairing the headset with Bluetooth devices CAUTION Danger of malfunction! The transmitted radio waves of mobile phones can impair the operation of sensitive and unprotected devices. 왘 Only make calls with the headset in locations where wireless Bluetooth transmission is permitted. The headset complies with the Bluetooth 5.0 standard.
Putting the headset into operation Pairing the headset with a Bluetooth device By way of example of a mobile phone, the following chapter describes how to pair the headset with a Bluetooth device. In case of deviation, proceed as described in the instruction manual of your mobile phone. 1 Switch the headset off (see page 16). 2 Keep the multi-function button pressed and gently pull the on/off power slide away from the headset. The LED alternately flashes blue and red. The headset is in pairing mode.
Using the headset Using the headset Individually adjusting the headset and wearing it For an optimized and individual wearing comfort, the headset can be worn on your left or right ear in three different ways: with the ear hook or the ear adapter or a combination of both. Wearing the headset with ear adapter The ear adapter with loop is supplied in 3 different sizes: S, M, L. Select the size that fits your ear.
Using the headset Wearing the headset using the ear hook You can combine the ear hook with the ear adapter without loop. If then the headset does not fit properly, use one of the ear adapters with loop. 1 Remove the ear adapter with loop if necessary and attach the ear adapter without loop, whichever feels most comfortable. 2 Attach the ear hook to the headset. If you want to change the wearing ear of the headset, attach the ear hook the other way round.
Using the headset Switching the headset on and connecting it 왘 Gently pull the on/off power slide away from the headset. The LED flashes blue 3 times. The voice prompt “power on” is announced in the headset. The LED flashes 3 times blue every 2 seconds until the headset finds a paired Bluetooth device to connect to. Once the connection is successfully established, the voice prompt “Phone one connected” is announced in the headset. 3x 1. ”power on“ 2. „...
Using the headset Switching the headset off 왘 Gently push the on/off power slide towards the headset. The voice prompt “power off” is announced in the headset and the LED flashes red 3 times. The headset ends the call and switches off. ”power off“ 3x All volume settings are saved automatically when the headset is switched off. Verifying remaining battery life You can retrieve information on the remaining battery life at any time except when you are on a call: 왘 Press the multi-function button.
Using the headset Changing the volume WARNING Vol + Hearing damage due to high volumes! Listening at high volume levels for long periods can lead to permanent hearing defects. 왘 Set the volume to a low level before putting on the headset. 왘 Do not continuously expose yourself to high volumes.
Using the headset Making calls using the headset Making a call WHITE NOISE Application 왘 Dial the desired number on your mobile phone using the WHITE NOISE application. Accepting/rejecting/ending a call You hear a ring tone in the headset and the LED flashes blue. If the headset battery is low, the LED flashes red instead of blue.
Cleaning and maintaining the headset Cleaning and maintaining the headset Cleaning the headset 왘 Only use a dry cloth to clean the product. Storing the headset If you do not use the headset for extended periods of time: 왘 Charge the built-in rechargeable battery every 3 months for about 1 hour. 왘 Store the headset in a clean and dry environment.
Cleaning and maintaining the headset Updating the software of the product You can update the software of your headset by using the free “Sennheiser Updater” PC software. 왘 Download the “Sennheiser Updater” from www.sennheiser.com/cco/software. 왘 Install the PC software. To install the software, you need administrator rights on your computer. If necessary, contact your IT department. Updating the software of the headset 1 Use a USB cable with mini USB plug to connect the headset to your computer.
If a problem occurs ... If a problem occurs ... Problem Possible cause Possible solution Headset cannot be switched on The rechargeable battery is flat. Recharge the rechargeable battery. 10 No audio signal The headset is not paired with the mobile phone. Check if the headset is paired. If necessary, pair the headset again. 12 The volume is adjusted too low. Increase the volume. 17 The headset is switched off. Switch the headset on. 15 The pairing does not work.
If a problem occurs ... If you are out of the Bluetooth transmission range Calling is only possible in the Bluetooth transmission range of the mobile phone. The transmission range largely depends on environmental conditions such as wall thickness, wall composition etc. With a free line of sight, the transmission range of most mobile phones is up to 30 meters.
Specifications Specifications MB 110 WN headset Dimensions (W x H x D) approx. 51 x 19 x 23 mm Weight without ear hook approx. 13 g Standby time up to 10 days Talk time up to 7 hours Charging time 1 h 20 min Rechargeable battery (built-in) Lithium Polymer; 3.7 V, 120 mAh Speaker type dynamic, neodymium magnet Speaker frequency response 300 – 3,400 Hz (narrowband) Sound pressure max.
French Canadian Compliance Statements "Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device." Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
Sennheiser Communications A/S Industriparken 27, DK-2750 Ballerup, Denmark www.sennheiser.com Publ.
