Instruction Manual

Putting the headset into operation
12 | MB 110
P
airing the headset with a Bluetooth device
By way of example of a mobile phone, the following chapter describes how
to
pair the headset with a Bluetooth device. In case of deviation, proceed
as described in the instruction manual of your mobile phone.
1 Switch the headset off (see page 16).
2 Keep the multi-function button pressed and gently pull the on/off
power sl
ide away from the headset. The LED alternately flashes blue
and red. The headset is in pairing mode.
3 Enable the Bluetooth
visibility on your mobile phone.
4 On the mobile phone, start a search for Bl
uetooth devices. All available
devices in the proximity of the mobile phone are displayed.
5 From the found Bluetooth devices, select “MB 110 WN” to establish a
Bluetooth conne
ction to the headset.
6 Once the headset is paired with the mobile phone, the LED goes off.
I
f pairing is not successful within 5 minutes, the headset automatically
returns to connectable mode. Repeat the pairing procedure.
1
3
6
4
20 cm
”Pairing successful”
2
”Pairing“
5
off
3x
MB 110 WN
Sennheiser MB Pro 1
Menu
Bluetooth on
Bluetooth off
on
press and hold while powering on
Menu
Add device