Datasheet

Issued August 2009
PRODUCT DATASHEET
DERAY - IB
coloured
Heat shrinkable sleeve – radiation cross-linked
Technical Data Current Values Test Methods
Material
Surface
SpecificGravity
Longitudinal Shrinkage
Shrink Ratio
PE, modified, lead and
cadmium free
matt
1.10 g/cm
3
max.
-10% max.
2:1
ASTM-D 792, A-I
ASTM-D 2671
Mechanical
Properties
Tensile Strength
Elongation
Secant Modulus
16 MPa
450 %
125 MPa max.
IEC 60684-2
IEC 60684-2
ASTM-D 882
Thermal
Properties
Thermal Aging
Tensile Strength
Elongation
Thermal Shock
Tensile Strength
Elongation
Cold Bend Test
flammability
Shrink Temperature
Storage Temperature
Continuous Operating
Temperature
(168 hrs at 158 °C)
12 MPa
350 %
(4 hrs at 200 °C)
13 MPa
300 %
does not break at -55°C
passed
+100°C to +200°C
+40°C max.
-55°C to +120°C
UL 224
IEC 811-1-2
ASTM-D 2671 Meth. C
MVSS 302
IEC 216
Chemical
Properties
Corrosive Action
Compatibility with Copper
Resistance against Chemicals
Water Absorption
Non-corrosive
Non-corrosive
Good
0.20% max
ASTM-D 2671 Meth. A
ASTM-D 2671 Meth. B
VDE 0473
Electrical
Properties
Dielectric Strength
Specific Volume Resistance
22 kV/mm
10
15
 x cm
VDE 0303 Part 2
VDE 0303 Part 3
Printability Hot stamp printing
Ink jet printing
Offset printing
Very good
Very good
good
Subject to modification.
All Information contained in this preliminary datasheet is believed to be reliable. We advise however that customers
should separately evaluate the suitability of our products for their particular application. DSG-Canusa GmbH gives no
guarantees in respect of the accuracy or sufficiency of the information presented and disclaim any liability regarding
its use. Our responsibilities are only those listed in our Standard Terms and Conditions of Sale for these products. In
no instance will we be liable for any eventual, indirect, or consequential damage or damages arising from the sale,
resale, transfer, use or misuse of the product.