Data Sheet

ManualsBrandsDSG Canusa Manuals(Rechargeable) Battery AccessoriesDSG Canusa 6100040954 Heatshrink + adhesive Black 4 mm Shrinkage:4:1 1.22 m

DSG-CANUSA PRODUCTS dsgcanusa.com

TECHNICAL INFORMATION DATA SHEET - DERAY®-IAKT / NS (SW)

SECTION 1: IDENTIFICATION OF THE PRODUCT AND OF THE COMPANY

Product Identity: DERAY®-IAKT (sw) / DERAY®-IAKT NS (sw)

Manufacturer: DSG-Canusa GmbH

Address: Boschstraße 17, Rheinbach, Germany

Postal Code: 53359

Emergency Phone Number: +49 2226-9047-0

SECTION 2: COMPOSITION/INFORMATION ON INGREDIENTS

CHEMICAL CHARACTERISTICS

Composition of ethylene vinyl acetate, polyethylene, stabilisers and pigments, additives containing bromine, antimony trioxide.

Free of lead and cadmium. Inner lining: modiﬁed polyoleﬁne

HAZARDOUS INGREDIENTS:

Antimony trioxide (present bound within the matrix of the polymer)

SECTION 3: HAZARDS IDENTIFICATION

There are no known hazards, if the product is processed under normal shrinking conditions.

SECTION 4: FIRST AID MEASURES

Eye Contact: Flush eye out with running water for several minutes. If necessary seek medical attention.

Skin Contact: If skin contact occurs with hot material, cool with running water, and, if necessary, seek medical attention.

After Inhalation: If exposed to decomposition products, move to fresh air and rest. Seek medical attention if necessary.

After Ingestion: No particular actions are required. Consult a doctor if symptoms are severe.

SECTION 5: FIRE FIGHTING MEASURES

Extinguishing media: Water, Dry Chemical, Foam

Unsuitable extinguishing media: none

In the event of ﬁre the following may be released: CO, CO², HBr

Protective equipment for ﬁre ﬁghters: Use self-contained breathing apparatus.

Summary of content (4 pages)

PAGE 1
TECHNICAL INFORMATION DATA SHEET - DERAY®-IAKT / NS (SW) SECTION 1: IDENTIFICATION OF THE PRODUCT AND OF THE COMPANY Product Identity: DERAY®-IAKT (sw) / DERAY®-IAKT NS (sw) Manufacturer: DSG-Canusa GmbH Address: Boschstraße 17, Rheinbach, Germany Postal Code: 53359 Emergency Phone Number: +49 2226-9047-0 SECTION 2: COMPOSITION/INFORMATION ON INGREDIENTS CHEMICAL CHARACTERISTICS Composition of ethylene vinyl acetate, polyethylene, stabilisers and pigments, additives containing bromine,
PAGE 2
TECHNICAL INFORMATION DATA SHEET – DERAY®-IAKT / NS (SW) DSG-CANUSA PRODUCTS SECTION 6: ACCIDENTAL RELEASE MEASURES Not applicable. SECTION 7: HANDLING AND STORAGE Handling: Please note processing instructions. If the material is strongly overheated, gaseous decomposition by products (monomers and other decomposition products) may be released. Protection against fire and explosion: No special measures required Storage: Keep in a cool, dry place.
PAGE 3
TECHNICAL INFORMATION DATA SHEET – DERAY®-IAKT / NS (SW) DSG-CANUSA PRODUCTS SECTION 10: STABILITY AND REACTIVITY Thermal Breakdown/Conditions to Avoid: To avoid thermal breakdown, do not overheat. Thermal breakdown starts at approximately 280°C. Hazardous Reactions: None known. Hazardous Decomposition or Byproducts: See section 5. SECTION 11: TOXICOLOGICAL INFORMATION No data available.
PAGE 4
TECHNICAL INFORMATION DATA SHEET – DERAY®-IAKT / NS (SW) DSG-CANUSA PRODUCTS SECTION 16 – OTHER INFORMATION DISCLAIMER: This information is accurate and reliable to the best of our knowledge. It is furnished without warranty, expressed or implied. DSG-Canusa, a division of Shaw Industries Ltd. assumes no legal responsibility for the use of, or reliance upon, this data for hazards which might be associated with the use of these materials or for results obtained.