Installation Guide

Installation (continued)
6
AA
CC
A
AA
□
□
4
Making the electrical connections
* Use wire connectors (CC) to connect the wires.
Ground wire:
1. Wrap the supply ground wire around the green ground screw
on the crossbar assembly (AA), no less than 2 in. from the end
of the wire. Tighten the ground screw.
2. Connect the xture ground wire to the supply ground wire
with a wire connector (CC).
Supply wire:
1. Connect the supply white wire to the white xture supply
wire with a wire connector (CC).
2. Connect the supply black (or red) wire to the black xture
supply wire with a wire connector (CC).
3. Wrap each connection with approved electrical tape and
carefully stuff all of the connected wires into the outlet box.
Green ground screw
□
□
5
Installing the xture body
Re-attach the ceiling canopy (A) of the xture body to the crossbar assembly (AA).
Secure with the previously removed mounting balls.
Mounting balls