User manual

AV2USB
Page 21 of 24
Copyrights DSP4YOU ltd
The panel is now reset and ready to be configured again.
5 Virtual Stream – AVB configuration for 3
rd
party AVB products
Since the AVBStreamer v1.4, designers can setup streams with a 3
rd
party AVB product providing you know the 64bit
unique stream ID you would like to “subscribe” to. While this information is sometimes available from a managed
network switch (or snooping around networks using a tool like Wireshark), it’s easier when a manufacturer provides
the ability to “read/write” the StreamID onto a stream.
For more information on how to use this feature, please consult your manufacturer to ask the ability of knowing the
stream ID.
6 3
rd
party Software and configuration
6.1 Audio Recording
The AV2USB will operate with any software compatible with ASIO/WDM driver standards. Remember to configure the
software such that it’s recording at the resolution/sample rate of the AVB stream (24bit/48kHz). In most software that
will be under preferences or the first dialog box when creating a multi-channel recording.
6.2 Audio Playback
Knowing the AV2USB streams audio at 24bit/48kHz by default, some software might require configuration of a sample
rate converter especially if you’re using ASIO drivers. If using WDM drivers, you can configure the sample rate and
resolution from Windows sound card settings. (Win Vista and up).
The below section will highlight some configuration steps for known multichannel playback software. DSP4YOU will
update the list and this manual over time.