User manual

PWR-DSP1 User Manual
Page 10 of 23
Copyrights DSP4YOU ltd
3 Setup guide
3.1 Box content
Box Content
 1 x PWR-DSP1 amplifier module
 1 x CAT5 patch cable
 1 x Molex connectors + 2 inserts to be crimped to speaker cable.
 Startup guide
Optional accessories available at webstore and required for operation
 PowerCON 20A NAC3FCA (Required for AC cable)
 M4 T Nuts (12pcs required per PWR-DSP1) to mount unit to your enclosure
3.2 Mounting instructions
The PWR-DSP1 is a plate amplifier module intended to be installed at the back of a custom loudspeaker enclosure.
See the mechanical drawing at the end of this document for more information.
3.2.1 Mechanical installation of PWR-DSP1
Mechanical dimensions of the PWR-DSP1 and required opening are available here. CAD drawings are also available
on request. We recommend the use of either 12 x M4 or 12 x wood screws to insure proper mounting of the PWR-
DSP1 to your speaker enclosure.
3.2.2 Thermal consideration
Although very efficient, the PWR-DSP1 is a powerful amplifier and will generate heat. (See thermal specifications for
more information). Two generic thermal designs apply: