Owner's manual

Gigabit Ethernet Metro-Switch Board and Firmware Users Manual
DSS NETWORKS, INC. Version: 1.14g Page: 39
wait data high 0
last read val 0
last progress code 4
mii timeouts 0
schan timeouts 0
schan err cnt 0
last schan rsp 0
l2 purge cnt 0
The clear stats command executes an implicit ‘stats show’ command before clearing the
stats values.
metro-sw> stats clr
ms: unit: 0 statistics
main loop cnt 8976
sw i2c read cnt 72765
sw i2c read fail 0
sw i2c write cnt 144969
sw i2c write fail 0
sw ack cnt 1724862
sda val 0
wait clk high 0
wait clk low 0
wait data high 0
last read val 0
last progress code 4
mii timeouts 0
schan timeouts 0
schan err cnt 0
last schan rsp 0
l2 purge cnt 0
9.1.20 GPIC REGS SHOW COMMAND
metro-sw> gpic regs 0
gpic[0x80000]: 1001800
gpic[0x80001]: 1
gpic[0x80002]: 1001
gpic[0x80003]: fff
gpic[0x80004]: 0
gpic[0x80005]: 0
gpic[0x80006]: 0
gpic[0x80007]: 0
gpic[0x80008]: 0
gpic[0x80009]: c2000020
gpic[0x8000a]: 180
gpic[0x8000b]: c2000021
gpic[0x8000c]: 180
gpic[0x8000d]: 0
gpic[0x8000e]: 0
gpic[0x8000f]: 0
gpic[0x80010]: 0
gpic[0x80011]: 0
gpic[0x80012]: 0
gpic[0x80013]: 0
gpic[0x80014]: 0
gpic[0x80015]: 0
gpic[0x80016]: 0
gpic[0x80017]: 0