Specifications

32
DStv HD Decoder Quick Guide
If the green lights blink below both i and BACK, the remote is in TV3 mode.
To set the remote to TV3 mode: press and hold both the i and
B
ACK buttons for 3 seconds or until you see the green light blink on
TV1 and TV2 (below the i and B
ACK buttons).
IMPORTANT
The DStv HD Decoder must be set up to “listen” for the correct mode. You can do this in DStv Central.
• Press the DStv button
• Go to “Settings”
• Select System Settings
• Select Remote Control
• If the remote is set to TV1 mode, set mode 2 and mode 3 to Ignore.
• If the remote is set to TV2 mode, set mode 1 and mode 3 to Ignore.
• If the remote is set to TV3 mode, set mode 1 and mode 2 to Ignore.
If your DStv HD Decoder is connected to another decoder using XtraView, please consult with your
DStv Accredited Installer for remote mode settings.
About the Remote Modes