Specifications

DSX-LAN (M)
LAN Communications Interface
DSX Access Systems, Inc. 10731 Rockwall Road Dallas, Texas 75238 / 888-419-8353 / 214-553-6140 / www.dsxinc.com
11/2012
 Powered from DSX Controller
 Auto-sensing 10/100 / Auto-Duplexing
 RS-232/RS485 Controller Communication
 UL 294 / UL 1076
 Dial-Up Modem Backup – Optional
 Static or Dynamic IP Communications

Password Protected Programming
General Application
The DSX-LAN(M) module is typically used to connect a
Master Controller to the Host or Comm Server PC over a
Local or Wide Area Network. The WinDSX software is
inherently TCP/IP capable and redirects communications that
would normally be transmitted out a serial port, over a
LAN/WAN to a particular IP address. The DSX-LAN(M)
module receives that communication and converts it to RS-232
or RS-485 that connects directly to the Master Controller. This
adds another avenue of flexibility to WinDSX by utilizing
TCP/IP communications as well as dial-up modem and direct
serial port connectivity. All three means of communication can
be used at the same time in the same system. The DSX-
LAN(M) is powered from the DSX Controller which can
provide battery backup.
The DSX-LAN(M) module is sold in two different
configurations. The DSX-LAN has IP as the only method of
connectivity. The DSXLAN(M) has dial up modem backup.
The DSX-LAN module must be ordered with the (M) option
along with the DSX modem to support the dial-up backup
feature.
Other Applications
The DSX-LAN can also be used at Slave Controllers with the
use of the PC Master Software. PC Master is a DSX software
application that emulates a Master Controller. It gets its
download from the Comm Server PC and communicates with
all of the Slaves just like a Master Controller does. What is
different about the PC Master software is its ability to
communicate with each Slave Controller via TCP/IP or with a
serial port connection. This allows Slave Controllers to be
placed on the LAN and each one or each group of controllers
to have a LAN connection using a LAN module. Modem
backup is not available for slave controller communication.
Dial-up Modem Backup
The DSX-LAN(M) module has a 9 pin serial port that is used
to connect a DSX modem for communications redundancy.
When the LAN(M) module determines a loss of network
connectivity it switches to “Modem Mode” which allows the
controller to call the Comm Server or Host PC via the modem
when necessary. When the Network connection is re-
established the Controller reconnects over the LAN. The
modem and the LAN(M) module are powered from the
Controller and are connected to each other via the supplied
serial cable.
Power
The DSX-LAN(M) is powered from one of the Controllers
12VDC outputs requiring a mere 300ma. Powering the module
from the DSX Controller provides a good stable battery
backed up source.
Mounting
The DSX-LAN(M) is designed to fit in the same Equipment
Cabinet as the DSX-1048 and DSX-1022 Controllers. It can
mount on the inside or rest in the bottom of the enclosure. It
has three mounting holes and removable terminal blocks.
Size
DSX-LAN(M) 5.5" W x 3.5" H x 1.0" D
Weight
DSX-LAN 12.0 oz.
Temperature/Humidity
Operating 0 to 70 C
Power Requirements
DC Input Voltage 12VDC @ 300ma