User`s guide

Devices
97
Workstation
Devices
display all card readers in the system. Readers listed with the red circle and slashes
are not online. Click on one of the readers and/or keypad in the window below and click the
right mouse button for the Device Command Menu.
Reader to TZ
instructs the reader to
follow it’s up to two possible time
zones.
Reader Disable instructs the reader to
shutdown and block all card reads
from that device, regardless of the
person’s access level.
Properties
display the full status for the field controller selected. This status
includes AC power, back-
up battery, and the state of all inputs and outputs on that
device along with the firmware version and amount of RAM in the panel
Device Summary
displays the communication Poll Status of all controllers in the
system. The firmware revision and amount of RAM in each panel is also
displayed.
Memory Layout Summary
displays the database entries and the amount of
panel memory each one requires. This table will also show the amount of events
the panels can buffer when communications to the Comm Server PC is offline.
Image Recall
is where the card holders imag
e is displayed in a positional window
when their card is used at a reader set for image recall. Each reader can be
programmed to perform Image Recall based on a time zone. The Recall can be
manually controlled with the use of the Image Recall: Enable, Disable, and
Back to TZ (schedule) commands.
Manual Image Recall is invoked by clicking on one of the card read events in
the upper event window.
To Remove the image display window select the Customize Menu at the top of
the screen and click on Image Recall Window or right click the image itself.
Slave Download Status to show if any slave controllers are in a download state.