User`s guide

DSX, Our Commitment to Service

Our Commitment to service is continually demonstrated through our Training Programs and Technical Support

Department. DSX stands behind its products and customers and constantly strives for excellence.

Our technical staff consists of engineers with field installation and service experience that are always ready to

answer any question. By providing a staff with years of security experience, DSX is able to offer valuable

insight into the complex issues that face the security contractor installing DSX equipment. DSX commitment to

service is unmatched in the security industry.

Information contained in this document was known to be true at the time of printing. This information is subject

to change at any time without notice. This document is a Team effort by the Technical Support Group at DSX.

Intent of this User Guide is to assist the actual user of the system in their daily operations. This Guide is a

supplement to the extensive Help system integrated into the software. Help is available by pressing F1.

DSX is a registered trademark of DSX Access Systems Inc; WinDSX is a trademark of DSX Access Systems

Inc.

The use of or reference to the term's Eltron, Fargo, Nisca, Pentium, Penware, Windows and Windows NT may

or may not be the registered trademarks of the respective companies.

Compliance

You must consult your local fire codes before installing any locking device on doors, gates, or barriers. A

construction and fire approval permit may be required before installing any equipment. Call your local Fire

Marshall for building code requirements in your area.

For UL installations, you must install the DSX System according to the UL Installation Manual and in

accordance with the National Electric Code, ANSI / NFPA 70 regulations and recommendations for US

Installations. Canadian installations must be in accordance with the Canadian Electric Code C22.1.

The DSX-1022, DSX-1040CDM, DSX-1040PDM, DSX-1042, DSX-1043, DSX-1044, DSX-CKI-C, DSX-

CKI-K, DSX-DP485 and DSX-FRB8 have been tested and found to conform to the requirements of UL 294.

The DSX-1022, DSX-1040CDM, DSX-1040PDM, DSX-1042, DSX-1043, DSX-1044, DSX-1040-PE-B, DSX-

MCI, DSX-LAN, DSX-SPS and DSX-2PC have been tested and found to conform to the requirements of UL

1076.

Camera and DVR integration was not tested by UL.

DSX Access Systems, Inc.

10731 Rockwall Road

Dallas, Texas 75238

888-419-8353 Sales, Shipping and Accounting

800-346-5288 Technical Support

214-553-6147 FAX