User`s guide

ManualsBrandsDSX Access System, Inc. ManualsComputer equipmentWinDSX

DataBase

Card Holder – New Card

8. Enter the

internal or

working

number of

the card

under code.

9. Enter the

number

printed on

the card.

13. Set the

Start and Stop Dates

and

Start and

Stop Times for this code. The Start Date defaults to

the current system date. The Stop Date is set to a

future date with a default of 12/31/9999 which

provides unlimited use. The Start and Stop Times

can be set in increments of 15 minutes.

The down arrow button to the right of each date field

pulls down a calendar to assist in setting these to

future dates.

12. Place a

checkmark

here if this

code is to be

used for

Guard Tour.

10.

P.I.N.

is an

optional keypad code

that is entered when

the system uses both

card readers and

keypads.

11. Enter the

# of Uses

this card will be

allowed. Once the card

has been used this

number of times it will

be automatically de-

activated. The default is

9999 for unlimited use.

14. Place a

checkmark

here if this

code is to be

exempt from

Anti-

Passback.

Enter the

Code

number and complete all other necessary information about

this New Cardholder on the Cards tab screen. Then click on the Access Level

Tab to assign an access level and optionally on the Linking Level Tab to

assign a Linking Level (elevator control) if necessary.