User`s guide

DataBase
Guard Tour
70
5. The
Station Number
is a number assigned by the system according to the order in which the
tour stations are defined. However the Station Number can be changed. This number signifies the
order in which the tour stations must be fulfilled unless the Random Station Order (set on the
General Tab) option is selected. Station 1 must be satisfied first followed by Station 2 and so on.
6. Click on the
Device (reader)
below that is to be
used in this Tour
Station. Double click
on the Device to
expand and display a
list of all associated
inputs to choose from
if the Tour Station is
to use and input
(alarm) point.
7.
Station Events
describe the
Action required for the Guard
to perform to fulfill the check-
in requirement at this Station.
Click on the drop down
selection box to choose the
action desired.
Each of the 99 possible
Stations in a Tour can have
any one of the Event Types.
8. Select the appropriate
Action Message by clicking
on the drop down selection
box. This is the Response Plan
displayed on the Workstation,
when there has been a failure
by a Guard to reach a Tour
Station within the Maximum
amount of time.
9. Enter the
Mini
mum
amount of time in minutes
from the beginning of the Tour that the Guard will
have to reach this station and perform the action
required. This would be the minimum amount of
time from the Start of the Tour until the Guard
reaches the station being defined. If the Guard
arrives early it is logged indicating how early.
10. Enter the
Maximum
amount of
time in minutes from the beginning
of the Tour that the Guard will
have to reach this station and
perform the action required. This
would be the maximum amount of
time from the Start of the Tour
until the Guard reaches the station
being defined. If the Guard arrives
late an alarm is generated
indicating how late to which
station and can optionally display
an Action Message.