User`s guide

DataBase
History / Elevator Floor Select
83
Select this box for
Elevator Floor Selection History
.
Uncheck this
box to define
what floors
are to be
tracked. See
text below
and page 82.
By selecting this report you are asking for a list of floor select activity and the associated access
granted. Include all event types can be unchecked and other events selected if desired.
If you want a report to include all access to the third floor you would select each of the devices
(readers in cabs) and the third floor inputs associated with each one.
If you want a report to include all access in a particular cab then you would select the device
(reader in a cab) and all of the floor select inputs associated with that device.
To configure the system for this report the floor select inputs have to be associated with the
Device (reader) that is in the same elevator cab. This allows for Elevator Floor Select Reports to
be run from History that show the card holders access and the floor they selected.
Also required for Floor Select Elevator reporting is the following: Under the Input Options Tab-
“Show status change message at PC” must be enabled (checked). On the Input General Tab-the
Name needs to reflect the Cab and the Floor select button this input is connected. For example
Cab 1 Floor 3.
Leave this
and all other
boxes at their
default. Not
needed for
the Elevator
Report.