smart watch USER MANUAL Thank you for choosing our smart watch. You can fully understand the use and operation of the equipment by reading this manual. The company reserves the right to modify the contents of this manual without any prior notice. Package box contains: a packing box, a manual, a host, and a data cable.
I. Watch function description Button description: 1) Short press on the dial interface to enter the menu style interface, and short press on the menu style interface to exit; 2) In the menu style interface, short press twice continuously to switch the menu style; 3) When entering the second-level interface or the third-level interface, the short-press function is the first-level and first-level exit function; 4) Long press the switch, choose X to not shut down, and choose √ to shut down.
1.1 Shortcut function: 1) Swipe to the left to find the "+" icon, click the icon to add part of the menu as a shortcut function. 2) Slide down to find Bluetooth connection status, time, power, do not disturb mode, brightness adjustment and other functions. 3) Swipe to the right to display, time/date/week, the latest message (enter to view multiple messages)/turn on or off Bluetooth for calls and display some of the recently used menu functions.
The watch and the APP are successfully bound, the corresponding notification authority in the mobile phone system is opened, and the mobile phone information can be synchronized with the watch. 1.5.1. Incoming call notification: Turn on the call reminder in the personal application. When the phone receives the call reminder, the watch will light up or vibrate. 1.5.2. SMS notification: The SMS notification is enabled in the personal application.
Put the watch on your wrist correctly, enter the heart rate menu, and you can measure the heart rate value at a time. 1.11 ECG Put the watch on your wrist correctly, enter the ECG menu (need to open the APP "ECG monitor" interface), you can measure the ECG value in a single time, and the single ECG measurement can be saved in the APP simultaneously. This function needs to be connected to the APP to use . 2.
Tap the green button to start the massage, and the watch is in a vibrating state, tap the red button to end the massage state. 2.10 Time setting Disconnected from the mobile APP and set the time function on the watch separately. 2.11 Voice assistant After connecting audio Bluetooth, you can wake up the phone's voice assistant feature (for example, IOS phone is Siri, Android phone is the voice assistant) 2.
1.2 For Android end user: Search for “WearPro” in the Google Play App Store or any customized Android Store to download, remember to check the phone pop-up box to agree to the permissions when installing; 1.3 For IOS end user: Search for “WearPro” in the APP Store to download, remember to check the mobile phone pop-up box to agree to the permissions when installing; After WearPro is installed, the application icon is shown as: 2. Connect APP through mobile phone Bluetooth 2.
4. Unbind Bluetooth connection from the APP side 4.1 Android system unbind Bluetooth from the APP In the "Device" column of WearPro, pull down to the "Unbind" and click to unbind the App; 4.
Set the start to end time period and the sedentary time interval (minutes) in the APP, click to enter the repeat setting only once or select the sedentary reminder date (week). When the sedentary time is reached, the watch will vibrate and there will be a sedentary icon. 13. Drink water reminder Set the start to end time period and frequency (minutes) in the APP, click to enter the repeat setting, select the drinking reminder date (week), check the drinking reminder and save it.
If you receive the goods and the watch does not turn on, it may be caused by a collision during the transportation of the watch and the battery Seiko board has been protected, so plug in the charging cable to activate it. If the battery is too low or the watch does not turn on after a long period of time, please plug in the data cable and charge it for more than half an hour to activate. Warranty description: 1.
FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
