Outdoor Sports Watch User Manual Thank you for choosing our smart watch. You can read this manual and have a thorough understanding of the use and operation of the equipment. The Company reserves the right to make changes to the contents of this manual without prior notice Model: DT28 Product includes: Package*1, manual*1, Smart Watch*1, Charging line*1.
I. Function description of bracelet 1.1 Button description: A: Press and hold the switch button, short press to lock the screen/wake up the screen. B: Return to the upper level interface. 1.2 Charging instructions: Magnetic charging is as shown below. *Be aware that the two contacts of the USB cable are not allowed to contact the conductor at the same time, or it will cause the circuit to burn.
1.1 Dial plate interface in standby mode: 1) Swipe right to open the push message interface; 2) Swipe down to open the drop-down menu which displays brightness, settings, do not disturb. Swipe left to open the weather interface 3) Swipe up to open the main menu list interface; 4) Press and hold the dial plate interface in standby mode to swipe and switch. Press and hold after selecting to set successfully. 1.
click "□" to end the sports and save the data; 1.8.2 Sports data can be saved when the distance is greater than 200 meters or the time is greater than 5 minutes; when the sports end without satisfying the condition, it will prompt “the data is too little to be saved” 1.8.3 After the bracelet is bound to the app, click the synchronization on the Fundo sports history interface to synchronize the history data of the sports at bracelet end and view trajectory and detailed data at the app end. 1.
end, but the APP is not affected. 1.18.2 Raise to wake It’s off by default. After connecting the APP, the on/off function at app end can control the function at bracelet end. This function can be manually turned on or off at bracelet end, but the APP is not affected. 1.18.3 About View the Bluetooth name and Bluetooth address and version number 1.18.4 Restore factory settings Click Restore factory settings to restore the bracelet to the factory state 1.18.
mobile phone. 2.3 Find devices After the bracelet is successfully bound to the app, click Find Bracelet to vibrate and wake up bracelet screen for three times; 2.
Set the period from start to end and sedentary interval (minutes), threshold (steps), click to enter the resetting to select the sedentary reminder date (week). When the sedentary reminder time arrives, it vibrates and shows sedentary icon at the bracelet end. 2.10 Alarm clock reminder Click the alarm clock reminder setting to add the alarm time. When the alarm time arrives, the bracelet will prompt: the alarm icon and time, and vibrate for 20 times; 2.11 Reminder mode a.
Warranty 1. If it appears quality problems caused by manufacturing, materials, design within one year（since the day of purchase）, we will offer free warranty for. We will offer free warranty for battery and adapter within 6 months. Premise is using normally and correctly. 2. About the fault caused by the users personal reasons, we don't offer free warranty, as follows: 1). Disassemble or refit the product. 2). Caused by immodesty drop 3).
Date of purchase: IMEI code: Buy store: Customer signature: Clerk Signature: Shop stamp:
FCC statement: § 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. § 15.
