FCC ID: 2ASHI-DT78 【 Smart bracelet】 Instruction manual
【Plateforme d'adaptation et exigences】 1.Android 4.4 and above 2. iOS 8.5 and above 3. Support Bluetooth 4.0 and above 【Product details】 Heart rate reading sensor Charging port Full touch display (the obverse) (back) 【Introduction of the function】 1.Time: Time, date, remaining power are shown on the watch face. (Once smart band connected to the device, time will be synchronized with device time. The time cannot be set on the smart band). 2.
5.Heart Rate function interface: Click into measure your current heart rate on the heart rate interface, the result will be shown afterward. More details and data are recorded and synced in the APP. 6.Blood pressure function interface: Click into measure your current blood pressure on the blood pressure interface, the result will be shown afterward. More details and data are recorded and synced in the APP. 7.
【USE】 Swipe down to the shortcut page with brightness adjustment, automatic brightness, and do not disturb mode. Slide left to enter the measurement heart rate screen. The dial interface slides to the right to view the message. The dial interface slides up into the function list, slides up and down to switch the function list, clicks to enter the function interface, and slides right to exit.
【APP connection method】 WearFit2.0 APP QR code (WearFit2.0 allows the use of mobile app features) 1. Scan the QR code above to download or search “Wearfit 2.0” in Android store or APP store to download and install. 2. Press and hold the touch button for 3 seconds to turn it on, open and enter the “WearFit2.0” app, search for the device according to the APP connection wizard, select the device model, and complete the connection pairing.
【Wearfit 2.0 introduction】 1. Home page, additional functions, personal information 2. Sleep module: Record the daily, weekly, and monthly sleep information in the form of chart. Base on the bracelet data to calculate the daily sleep quality and sleep time. 3. Step module: A chart will be drawn to show the steps, distance and calories burnt accordingly. Provide an insight for user of daily, weekly, and monthly data. 4.
【Basic parameters】 Screen size 1.4 inch Bluetooth Bluetooth4.0 Waterproof level IP67 Type of battery Lithium polymer battery Battery capacity 170mAh Charging time 2 Hours bracelet size 42.5mm*36.5mm*11mm Charging Magnetic charging,Voltage 5V Touch screen Full screen touch Package Smart bracelet+Magnetic charger+Instruction manual 【Remark】 1.If there is a product quality problem or the use of products is not clear, please contact our store by direct mail, we will deal with it quickly. 2.
QUALIFIDE CERTIFICATE MODEL : CHECKER : DT78 QA PASS
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.