SMART WATCH USER MANUAL Thank you for choosing our smart watch. You can read this manual and have a thorough understanding of the use and operation of the equipment. The Company reserves the right to make changes to the contents of this manual without prior notice. Product package including: Smart Watch*1, Strap*1, User manual*1, Charging cable*1.
1. Function description 1.1 Button Button A: Long press to switch ON/OFF, short press to turn ON/OFF the screen. Button B: Short press to enter multi‐sport mode, to press 'Pause' or 'Start' the function on the sport interface. Button C: Touch screen, support full touch screen. 1.
* Please note that the two contacts of the charging cable cannot contact the conductor at the same time, which will cause the circuit to burn. 1.1 Standby dial interface 1) Slide right to entre menu interface, the menu function is the default smart style, enter the menu function, and slide up/down/left/right to view the menu function icon.
Step counting is enabled by default, the interface displays the current step count of the watch, and the data is cleared at 12 a.m. every day 1.5 Sleep monitor Sleep monitoring time period: 21:00 to 09:00 the next day, the watch generates data. After exiting sleep monitoring, the watch sleep data can be synchronized to the APP after binding the app 1.
1.11 Alarm clock Watch binding app. Set the alarm in the app to sync to the watch. 1.12 Stopwatch Click the stopwatch to enter the timing interface, click the ' Start' icon to start timing, and click the icon again to pause. Swipe right on the screen to exit, and then enter the stopwatch again. The previous time is cleared and restarted. 1.13 Find phone After the watch is bound to the app, click on the watch to find the phone, and the phone will vibrate or ring to remind. 1.14 Setting 1.14.
1.14.6 Menu style Click to select the menu style 1.14.7 QR code Scan the QR code to download APP 1.14.8 Vibrating Click to adjust the vibration intensity 二．Binding the app 1. APP Download method 1.1 Scan QR code download 1.
After the watch is turned on, Bluetooth has been searching. After turned on the APK / APP, go to ‘Device’‐ Add device‐click‘ Start ’to search, select‘ click ’the corresponding watch device name, you can bind the watch to the app successfully. 3.2 Bound app status： Watch time synchronization: After the watch and app are successfully bound, click to synchronize the watch and phone time. 3.
3.6 Wechat sports Watch sports data can be synchronized to WeChat sports rankings Binding method: Android system: first bind the app, then enter WeChat to bind. There is an operation method in ‘app’ iOS system: Enter WeChat public account, click on the details in the upper right corner, data source, add data source from 3.7 iOS system health After setting, you can view FitcloudPro data on iOS system health 3.
When the watch is bound to the app: After unbinding the device, click 'OK' to unbind it. The iOS system needs to go to the phone settings to ignore the Bluetooth device. 3.14 Push dials Connect the app, in 'Device'‐'Dial Settings'‐Click on 'Dial'‐After synchronizing the dial, the watch will disconnect and then connect automatically ●FAQ *Please avoid exposing the device to extreme temperatures of excessive cooling or overheating for a long time, which may cause permanent damage.
3． When requesting a free warranty, please provide a warranty card with the date of purchase and the stamp of the place of purchase. 4． When the user repairs the product, please take the product to our company or our distributor. 5．Functions are subject to the physical product.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
