Operation Guide

Start Up
If the power up (from Standby mode or otherwise) is successful, the appropriate interface will be displayed
after a launch sequence of several seconds. The wireless LAN connection may take 10-15 seconds to be
established.
Configuring the Mobile Tablet
The DT313Y/ DT313Q may be configured using the utilities and methods dictated by the software operating
system. The DT313Y/ DT313Q should be configurable for various properties such as user profiles, network
features, and several system elements.
Wireless Networking
Wireless LAN
The DT313Y/ DT313Q is often delivered with an embedded (user-inaccessible) 802.11ac WLAN adapter
equipped with a hidden custom antenna.
• Through the support of typical WLAN adapters, the DT313Y/ DT313Q should be able to detect all 802.11
access points in the vicinity for you to select the access point of your choice for connection.
• The SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT313Y/ DT313Q and the access points
have to match. The SSID is case-sensitive and it is recommended that you enable WEP/WPA/WPA2
encryption (or advanced alternatives) for secure access.
• When WEP/WPA/WPA2 is enabled, you may need to consult your network administrator or your
networking equipment literature to properly configure associated settings such as Authentication mode,
etc.
• Refer to the access point operating manuals for setting up the 802.11 access points.
Bluetooth
The Bluetooth configuration application is enabled from the Windows System Tray or from the Android
Settings APP. Follow the instructions and options provided within the application to configure and invoke
Bluetooth connectivity with the corresponding peripherals.
5