Operation Guide

PRECAUTIONS
The DT382GL/ DT382GL-TR
2
3
A
NOTE:
The battery packs shipped with your tablet may be low in power - please use
the AC-DC adapter with the DT382GL when setting up for the first time to fully
charge the battery pack.
• Always exercise care when operating and handling the DT382GL
• Do not disassemble any portion of the DT382GL, as this will void any product
warranty.
• Do not use any power adapter or charging cradle other than the one provided
with the tablet or acquired from the manufacturer or its partners.
• In the unlikely event that abnormal noise, strange odor, or smoke is present,
immediately power down the DT382GL and disconnect all power sources.
Please report the problem to your device provider immediately.
OPERATION
Powering ON and OFF
To activate DT382GL, push and quickly release the Power Button. The display will come
on in a few seconds. To put the DT382GL in standby mode, push and quickly release the
Power Button. To turn the DT382GL off for extended storage, power off safely using any
software function that “shuts down computer” provided in the software operating
system.
Input/ Output Ports
A
USB Type-C Port (power input)
B
Audio Jack
C
USB Port
Data Capture Modules
Button Functions
D Smart Card Reader
E
Barcode Scanner (optional)
F Back Camera (optional)
E
F
Battery/ Power LED
1
B
C
2
5
6
3
D
4
NOTE:
Avoid using the Power Button (“hold 4+ seconds” feature) to turn off the tablet—
this form of hardware shutdown is intended to be a means of recovery from
lockups, and not as normal operation.
NOTE:
When the battery pack is charging, the blue-colored Battery LED should blink
slowly. If plugging in the AC-DC adapter does not trigger this blinking activity
and the LED stays dark, the battery pack(s) may have been drained substantially.
Unplug/ replug the AC-DC adapter to the DT382GL a few times to activate the
charging process.
NOTE:
To conserve power, push and quick release the Power Button to make the tablet
in standby mode while not in use. Pushing briefly on the same butt on will wake
up the system.
BUTTON
ACTION
1
Power Button
2
Windows Key Button
3
Programmable Buttons
4
Brightness Control Buttons
5
Trigger Button/
Programmable Button
6
Barcode Scanner Trigger Button/
Programmable Button