User's Manual

Version: 1.0
DT Research, lnc. Taiwan Branch
6F., No.36 Wuquan 7 th Rd., Wugu Dist. New Taipei City 248 Taiwan
TEL: [phone]
21.
22. This equipment shall not be used for life support system.
23. A periodical checking of power adapter is necessity if they are any abnormal condition happened shall be
contact with manufacturer, refer to item 22.
24. The equipment is placed front side in normal use that shall not be undertaken in transport position.
25. If you notice any abnormalities such as odor, noise, or smoke, stop using this device. Otherwise a fire or
burn may result. Remove the batteries carefully to avoid burning yourself, and contact your dealer or
consult DT RESEARCH INC.
26. External equipment intended for connection to signal inputs, signal outputs or other connectors shall comply
with the relevant product standard e.g. IEC 60950-1 or IEC 62368-1 for IT-equipment and the IEC 60601-
series for Medical Electrical Equipment. In addition, all such combinations – Medical Electrical Systems –
shall comply with the safety requirements stated in the general standard IEC 60601-1, edition 3, clause 16.
Any equipment not complying with the leakage current requirements in IEC 60601-1 shall be kept outside
the patient environment i.e. at least 1.5 m from the patient support or shall be supplied via a separation
transformer to reduce the leakage currents.
Any person who connects external equipment to signal inputs, signal outputs or other connectors has
formed a Medical Electrical System and is therefore responsible for the system to comply with the
requirements. If in doubt, contact qualified medical technician or your local representative.
27.
FCC Regulations
⚫This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
⚫This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to
operate the equipment.
Packing List
Before installing your Digital Terminal, ensure that the following materials have been received:
• Medical Cart Computer, DT313
• User's manual
• Power Adapter , EDAC POWER ELECTRONICS CO LTD, Model EM11011M
(Rated Input 100-240 Vac, 2.0-1.0 A, 50-60 Hz. Output: 19 Vdc,6.31A)
• Base stand (optional)
MEDICAL – GENERAL MEDICAL EQUIPMENT
AS TO ELECTRICAL SHOCK, FIRE AND MECHANICAL
HAZARDS ONLY IN ACCORDANCE WITH ANSI/AAMI ES
60601-1 (2005) + AMD (2012) &"CAN/CSA-C22.2 No.
6060-1 (2008) + (2014)