User's Manual



OPERATION



Internal Battery

Warning! !

TheInternalbatterypackshouldonlybereplacedbyanauthorizedDTResearchservicerepresentative.

Pleasecontactyourproductand/orserviceproviderforinternalbatteryreplacementservice.

Powering ON and OFF

ToactivatetheDT311,pushandquicklyreleasethePowerButton.Thedisplaywillcomeoninafewseconds.

ToputtheDT311inStandbymode,pushandquicklyreleasethePowerButton.ToturntheDT311offfor

extendedstorage,poweroffsafelyusinganysoftwarefunctionthat"shutsdowncomputer"providedinthe

softwareoperatingsystem.



NOTE:

Thebatterypacksshippedwithyourtabletmaybelowinpower—pleaseusetheAC‐DC

adapterwiththeDT311whensettingupforthefirsttimetofullychargetheinternalbattery

pack.YoumaychargetheexternalbatterypackwithitattachedtotheDT311,orwiththe

optional

externalbatterychargerkit.



NOTE:

Whenthebatterypack(s)is(are)charging,theblue‐coloredBatteryLEDshouldblinkslowly.If

pluggingintheAC‐DCadapterdoesnottriggerthisblinkingactivityandtheLEDstaysdark,

thebatterypack(s)mayhavebeendrainedsubstantially.Tryunplugging/repluggingthe

AC‐DCadaptertotheDT311

afewtimestoactivatethechargingprocess.



NOTE:

Toconservepower,use(pushandquickrelease)thePowerButtontoputthetabletin

“Standby”modewhilenotinuse.Pushingbrieflyonthesamebuttonwillwakeupthesystem

withinseconds.



NOTE:

AvoidusingthePowerButton(“hold4+seconds”feature)toturnoffthetablet—thisformof

hardwareshutdownisintendedtobeameansofrecoveryfromlockups,andnotasnormal

operation.



ENGLISH 4

