User's Manual



Precautions:
Always exercise care when operating • and handling the medical cart computer.
• Never disassemble any portion of the enclosure, as this will void any product warranty on the medical cart computer.
• Do not use any AC/DC adapter other than the one provided with the device or a replacement acquired from the
manufacturer.
• In the unlikely event that smoke, abnormal noise or strange odor is present, immediately power down the medical
cart computer and disconnect all power sources. Please report the problem to your device provider immediately.
Basic Features
The medical cart computer integrates a bright 19”, 22” or 24” display with optional capicitive touch, USB ports, and is
complemented by a smart card reader option for comprehensive point-of-care applications.
Powering ON and OFF
If your medical cart computer comes with the battery packs, please open the battery slot caps and then put in the battery
packs one by one. If not, please use the AC-DC adapter with the medical cart computer for the power supply. To activate
the medical cart computer, push and quickly release the Power Button and the display will come on in a few seconds. To
put in Standby mode, push and quickly release the Power Button. To turn off for extended storage, power off the device
safely using any software function that “shuts down computer” provided in the software operating system.
NOTE:
The battery packs shipped with your device may be low in power—please use the AC-DC adapter with
the medical cart computer when setting up the device for the first time to fully charge the internal battery
packs.
NOTE:
When the battery pack(s) is (are) charging, the blue-colored Battery LED should blink slowly. If plugging
in the AC-DC adapter does not trigger this blinking activity and the LED stays dark, the battery pack(s)
may have been drained substantially. Try unplugging/ replugging the AC-DC adapter to the medical cart
computer a few times to activate the charging process.
NOTE:
To conserve power, use (push and quick release) the Power Button to put the device in “Standby”mode
while not in use. Pushing briefly on the same button will wake up the system within seconds.
NOTE:
Avoid using the Power Button (“hold 4+ seconds” feature) to turn off the device—this form of hardware
shutdown is intended to be a means of recovery from device lockups, and not as normal operation.
ENGLISH 3
DT590B/ DT592B/ DT594B