User's Manual

ManualsBrandsDT Research ManualsComputers & AccessoriesMobile Tablet





DT301

BASICOPERATIONGUIDE





ENGLISH



INTRODUCTION

ThankyouforacquiringthelatestadditiontoDTResearch’slineoftablets—theDT301.

Featuringaslimyetrobustenclosure,theDT301with10.1”capacitivetouchdisplayispowered

bytheIntel®processor,offeringoptimalcombinationsofperformanceandpowersavings.The

DT301isavailablewithMicrosoftoperatingsystem.Theoperatingsystemfeatureswebbrowser,

client/servercomputingsoftware,mediaplayer,accessories,andapplicationssupport.



PACKAGECONTENTS

• OneDT301withBatteryPackandHandstrap

• CapacitiveTouchStylusandLanyard

• AC‐DCPowerAdapterwithPowerCord

• BasicOperationGuide



Summary of content (10 pages)

PAGE 1
DT301 BASIC OPERATION GUIDE ENGLISH INTRODUCTION Thank you for acquiring the latest addition to DT Research’s line of tablets — the DT301. Featuring a slim yet robust enclosure, the DT301 with 10.1” capacitive touch display is powered by the Intel® processor, offering optimal combinations of performance and power savings. The DT301 is available with Microsoft operating system. The operating system features web browser, client/ server computing software, media player, accessories, and applications support.
PAGE 2
DT301 DT301: Input/ Output Ports Button Functions A Headphone Jack BUTTON ACTION B USB 3.0 Port 1 power button C DC Power Input 2 programmable button D Smart Card/CAC Reader 3 Battery Latch E Back Camera (optional) 4 • Push the switch to unlock the latch, than slide the latch to left to remove the battery.
PAGE 3
ENGLISH 2 Precautions • Always exercise care when operating and handling the DT301. • Do NOT apply excessive pressure to the display screen. • Avoid prolonged exposure of the display panel to any strong heat source. Wherever possible, the DT301 should face away from direct light to reduce glare. • If the AC‐DC power adapter is used to recharge or power the tablet, do NOT use any AC‐DC adapter other than the one provided or acquired from the manufacturer or its partners.
PAGE 4
ENGLISH 3 DT301 OPERATION Internal Battery Warning ! The Internal battery pack should only be replaced by an authorized DT Research service representative. Please contact your product and/or service provider for internal battery replacement service. Powering ON and OFF To activate the DT301, push and quickly release the Power Button. The display will come on in a few seconds. To put the DT301 in Standby mode, push and quickly release the Power Button.
PAGE 5
ENGLISH 4 Start Up If the power up (from Standby or otherwise) is successful, the appropriate interface will be displayed after a launch sequence of several seconds. The wireless LAN connection may take 10‐15 seconds to be established. Configuring the Mobile Tablet The DT301 may be configured using the utilities and methods dictated by the software operating system. The DT301 should be configurable for various properties such as user profiles, network features, and several system elements.
PAGE 6
ENGLISH DT301 Bluetooth The Bluetooth configuration application is enabled from the System Tray or from the Windows Mobility Center. Follow the instructions and options provided within the application to configure and invoke Bluetooth connectivity with the corresponding peripherals. USING THE MOBILE TABLET Peripherals Support Through its USB port, the DT301 supports a wide range of USB‐based peripherals.
PAGE 7
ENGLISH 6 Federal Communication Commission Interference This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 8
ENGLISH 7 DT301 Specifications: DT301 Item System CPU Intel® 6th Generation Core™ i7, 2.6GHz RAM 8GB Storage 128GB flash Operating System Microsoft® Windows® 7 Professional or Windows® 10 IoT Enterprise Display 10.1” LED‐backlight screen with multi touch capacitive touch Display Resolution 1920 x 1200 Network Interface Wi‐Fi 802.11ac, 2.4GHz/ 5GHz dual band; Bluetooth 4.
PAGE 9
FCC Regulations: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
PAGE 10
RF Exposure Information (SAR) This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.