User Manual
ㆰ᱃֯⭘䈤᰾Җ
Warning
Warning
Enter the main interface, select system management, enter into the
system management interface.
Q: Does it support voice intercom, how to talk?
A: Support voice intercom, select the intercom IPC channel, zoom in, click
the intercom icon,long press the icon to speak, the intercom function can
be realized; when released, the speech ends.
Q: How to turn the alarm sound/doorbell button prompt on or o?
A: Enter the main menu, select the alarm setting, adjust the alarm volume,
set the alarm volume to 0, mean turn o all alarm sounds; set to non-zero
value, mean the alarm sound turned on.
Daily update maintenance
Q: Does the battery support charging? How to charge?
A: Support charging, battery switch to "OFF", connect to the power adapter.
Q: How long does the fully charged battery work?
A: Generally it can reach about 1-2 hours (When you need to use battery
power, you need to turn the battery switch to "OFF", connect the external
power supply and activate it before it can be used normally.).
FA Q
Extend Wireless Range
correct method fault method
System info: Including device model, cloud ID, software version, etc.
Factory setting: Includes simple restore and restore all settings
Change password: Modify the remote access login password
Upgrade: Device-side main engine upgrade
IPC upgrade: Upgrade the camera
Reasonably adjust the antenna and optimize the signal
radiation direction
Relationship between rod antenna gain and coverage
3dB5dB
Worst signal direction
Best signal direction
As can be seen from the bar
antenna gain chart as shown
on the right, the signal coverage
of the antennais similar to anapple.
The antenna is located in the
center of the apple,and the signal around the antennais strong. The upper
and lower ends of the antenna are recessed, and the signal is weak.
According to the signal transmission characteristics of the antenna, in order
to ensure the optimal image transmission eect of the wireless NVR Kit, it is
required:
1. The antennas of the NVR and IPC should be placed in a high and open place, and
not near the walls, metal, glass and other obstacles, which will aect the signal's
outward divergence.
2. The antenna of the IPC should be placed in parallel with the NVR antenna as much
aspossible so that the respective maximum radiation direction angles are opposite to
formthe maximum signal coverage, as shown in the gure below.
FCC RADIATION NORM
FCC
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received,including interference that may cause
undesired operation.
These limits are designed to provide reasonable protection against frequency
interference in residential installation. This equipment generates, uses, and can
radiate radio frequency energy, and if not installed or used in accordance with the
instructions, may cause harmful interference to radio communication.
However, there is no guarantee that interference will not occur in television
reception, which can be determined by turning the equipment o and on. The user
is encouraged to try and correct the interference by one or more of the following
measures:
•Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
•Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
CAUTION!
The Federal Communications Commission warns the user that changes or
modications to the unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested andfound to comply with the limits for a
Class B digital device, pursuant to part 15 of theFCC Rules. These limits are
designed to providereasonable protection against harmfulinterference in a
residential installation.
This equipment generates,uses and can radiateradio frequency energy and, if not
installedand used in accordance with the instructions,may cause harmful interfere-
nce to radio communications. However, there isno guarantee that interference will not
occurin a particular installation. If this equipmentdoes cause harmful interference
toradio or television reception, which can bedetermined by turning the equipment o
andon, the user is encouraged to try to correctthe interference by one or more of the
followingmeasures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipmentand receiver.
—Connect the equipment into an outlet on acircuit dierent from that to which the
receiveris connected.
—Consult the dealer or an experienced radio/TV technician for help.
1
2
3
4
Notes:
Device will not in guarantee if caused by below reason:
Accident;negligence;disaster;mis-operation.
Do not conform to the environment and conditions,such
as power improper,working temperature too hight or too
low,lightning stroke.ect.
Ever be maintained by other center which not belong to
the real factory.
Goods already sold more than 12 months.
APP remote viewing video
Download and install
You can search for "EseeCloud" in App Store, App Store and other application markets to
download. Or scan the QR code below to download.
$33GRZQORDG(VHH&ORXG
5HJLVWUDWLRQDQG/RJLQ
1). Click Register, input your mobile phone number/email, input the verication code, and
complete the registration;
2). Enter your registered mobile phone number and password on the login interface, and
click Login；
3). Click the third-party application icon at the bottom of the login interface, and you can log
in successfully after completing the authorization.
Note: Apple mobile phone system requires iOS system 9.0 or above, Android
mobile phone system requires Android 5.1 or above.
Add device
1). Click “+ on the device list interface to add a camera;
2). Scan the QR code on the recorder (click the QR code icon in the lower left corner of
the video preview interface);
3). Set the device name to add successfully.
View video screen and video playback
(Tips: Please make sure that your video recorder is connected to the Internet when using the
EseeCloud APP to add and view the video recorder screen)
Device List Click the device card to enter the video preview interface, select View
Playback to view the channel video recording of the recorder.
As can be seen from the bar antenna gain chart as shown on the right, the signal
coverage of the antennais similar to anapple. The antenna is located in the center
of the apple,and the signal around the antennais strong. The upper and lower ends
of the antenna are recessed, and the signal is weak.
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.