User's Manual

2 DTC Communications, Inc.
User’s Manual March 1999
9.
Select a method for
recorder control by
using the POWER
switch in the RX
RECORDER section.
MANUAL: Record Mode activate is
controlled at the Marantz.
AUTO: Record Mode activate is
controlled by audio squelch level
on the DSS-900-KT RX.
8
10.
Utilize extra outputs
for additional
original audio
recordings.
Connect extra recorders to VCR
and SPARE RECRDR output jacks.
14
11.
Choose your alarm
type with the MODE
SELECT switch in the
RANGE section of
the RX.
OFF: Latching ALARM LED only.
No beep tone; no alarm tone.
BEEP TONE: The higher the beep
pitch, the closer the range.
ALARM ONLY: Steady audible
alarm if the RX loses lock on the
TX signal. You can reset the tone
only by rotating the MODE SELECT
switch to OFF or by regaining
adequate signal strength.
10
12.
Check the vertical
string of alarm
LEDs.
Keep as many LEDs lit - green,
yellow and red - as possible.
11
13.
LEDs drop to the
yellow zone.
Immediately close range to the
agent.
15
14.
If red LEDs only
appear.
Reposition agent or get RX
closer. You are about to lose all
audio!
11
Step
No.
Step Reference Quickstart Action
For Details
See Page