User's Manual

9
HEAT SINK
Palladium 250 Heat Sink
The Palladium 250 is supplied with a heat sink attached. DO NOT remove the heat sink unless
you have an alternate mounting surface that will dissipate the heat properly. In ambient
temperatures of 25
o
C or less, the transmitter chassis should be held at 50
o
C or less.
WARNING: The Palladium 250 may become too hot to touch without a proper
heatsink attached, such as the one supplied. Damage to internal components
may occur if operated beyond the recommended temperature range. If placed in
an enclosure, proper ventilation and mounting is required. If designing a custom
heatsink, keep the transmitter chassis temperature at 50oC or less. The transmitter
must be mounted to a heatsink on the transmitter’s “blank side” as shown on page 8.