User Manual

DTC COMMUNICATIONS, INC.
13
Audio Input Level
This control is used to define the audio gain to be applied to the audio
input signal. 0dB is used for line level audio and various options up to
48dB of gain can be applied for microphone inputs. 3.5 VDC is applied at
the microphone connector for “phantom power” used to power electret
condenser microphones. Input impedance is 5K Ohms. The transmitter
works best with a high-impedance audio source.
Unit Name
Enter up to 16 characters to identify unit as desired.
Sleep Mode
This control allows the unit to be forced into a Sleep Mode where main
functions are disabled, and the power consumption is significantly re-
duced.
Data
Future use. Do not change.
Data Baud Rate
Future use. Do not change.
Chaining Input
Future use. Do not change.
Chain Number
Future use. Do not change.
PROGRAMMING
24 dB
(As Desired)
NO
OFF
1200
OFF
0
Default values are shown in red.
Advanced options are shown in blue. These
options are for trained and experienced technicians only.