User Manual

DTC COMMUNICATIONS, INC.

Current Config

This field reports the last loaded configuration number. Note that for the

Palladium transmitter, changes applied after the configuration has been

loaded are saved immediately into the current configuration.

Scrambling

Scrambling is enabled at the transmitter by selecting AES in the

scrambling field. At this point the user will need to ensure that the correct

key is in use and this is done by using Options > Write AES key. The

key is 128 bits and is entered as 32 ASCII hexadecimal characters (0-9 and

A-F). (256 bit is optional.) See page 15.

Video Locked (Status Only)

This status information indicates whether the transmitter is successfully

locked to the incoming composite video signal. Unlocked status may

indicate cabling faults, or poor quality incoming video feeds to the unit.

Software Version (Status Only)

This status information describes the version of the software running the

transmitter product.

FPGA Version (Status Only)

Engineering use only.

Serial Number (Status Only)

This status information is the electronic serial number of the transmitter

PCB. This number can be used for upgrades or support.

Chaining (Status Only)

Future use.

Options

PROGRAMMING

(Ch. No.)

OFF

Default values are shown in red.