User Manual

01/08/02

RCT-1 Handheld Encoder

The Handheld Encoder is a remote control transmitter, which provides secure short-duration command

signals for the Switch Receiver module. When used in conjunction with a properly deployed switch

receiver, a range of more than 100 Meters is available (note: the antenna is not removable). The signal

duration and power output of the handheld encoder is extremely low and the transmission is digitally

encoded. The size of the units is 5.0 X 2.75 X .75 Inches plus 3 Inches for the antenna.

Always start with a fresh Alkaline or Lithium 9VDC battery. The battery compartment may be accessed by

pushing down and back on the battery door and removing it. Insert the battery as shown:

BATTERY REPLACEMENT