User Manual

PROGRAMMING

DTC COMMUNICATIONS, INC.

Introduction

DTC has built a great deal of ﬂexibility into the programming options you

have on the T-2500-M. DTC factory programs your frequencies at time of

order at no additional charge to you.

Software and programming cable are included with the kit, enabling you

to change your frequencies and other associated features. This is ideal if

you work with other agencies, or anticipate the equipment being used by a

multi-jurisdictional task force. You can program up to ten channel

settings per unit. In general, this allows you to program most variations

you might encounter in the ﬁeld at the depot level.

The conﬁguration of each channel is managed with DTC’s Universal

Programming Software. This software is included with your transmitter

and allows you to do all of the following:

• Assign frequencies to each channel

• Enable/disable recording for each channel

• Select the mode of operation for each channel (digital clear, digital encrypted, analog

narrow, or analog wideband, analog scrambled)

• Set internal clock

• Select the DES-OFB and AES encryption keys and 16-bit key ID

Universal Programming Software CD

TIP: Make sure that you program

your devices to match frequencies

and test the components as a

system prior to going into the eld!