Specifications

Important Safety Instructions

Please read these safety instructions before unpacking and setting up your unit.

• It is important you follow all the warnings on the printer.

• Use only the type of power source that is indicated on the printer's label.

• All equipment must be connected to grounded outlets. Do not use the same outlet for any

other system such as a copy machine or an air control unit that turns on and off.

• Connect the printer to a power outlet that can easily be seen.

• Make sure you do not let the power cord get damaged and don’t connect the unit with a

damaged cord.

• If you are using an extension cord make sure the power ampere rate does not exceed the

cord ampere rate of the printer.

• Keep any items containing magnetic fields, such as electromagnetic devices, away from your

printer.

• Keep the printer away from locations with high humidity, vibrations, debris or dust.

• Leave enough space around the printer for proper ventilation.

 Prevent any sudden shocks to your printer, such as dropping the unit.

• Do not leave the printer near heat sources such as radiators, heat vents, or direct sunlight.

• Place the printer on a flat table or on a stable surface that extends around the printer. The

printer will not work properly if it is on an uneven surface or tilted or leaning in any way.

• Be careful when transporting the printer – keep it upright (not on its side or upside down) so

you do not spill the ink.

• Always turn the printer off before cleaning and clean with a damp cloth only. Do not spill any

liquid on the printer.

• Caution: Do not unplug the printer to shut it off. Use the power button instead. Do not unplug

the printer until the green power light is off.

• Do not block any of the printer's vents or insert anything foreign in its slots.

• Do not try to service the printer yourself, except where described in this manual. If you need

service, turn the printer off, unplug it and take it to Impression Technology or another

qualified repairer as recommended by Impression Technology.

Safety Instructions for Using the Printer and Handling Ink

•

Always keep ink and other consumables out of the reach of children.

• Be careful not to spill ink on your skin or in your eyes. If any ink does get on your skin wash it

thoroughly with soap and water. If ink gets in your eyes flush them out immediately with

water.

• Do not put your hand in the printer or touch the dampers once printing.

• Do not move the printer head by hand; doing so may damage the printer.

• Store the ink in a cool dark place.

• If you store the inks in a cold environment and are ready to use them, bring them to room

temperature before you use them.

 Do not dismantle the ink dampers. This could damage the print head.